Frigidaire FFHP093CS2 Installation Instructions - Page 13
Outdoor unit installation
![]() |
View all Frigidaire FFHP093CS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Outdoor unit installation 1. Install the outdoor part of the unit on a flat surface to avoid excess noise and vibration. A condenser pad is recommended. 2. Direct the air vent toward an area without obstacles. 3. Install the unit at the site where it is exposed to as little wind as possible, especially in areas where it is frequently windy. 4. If the installation site is exposed to heavy winds, such as in coastal areas, place the unit along the widest part of the wall or use protective plates. 5. Be sure there is no obstacle which blocks exhausting air, including schrubs or bushes. Strong wind Settlement of outdoor unit. Anchor the outdoor unit tightly and horizontally on a concrete or flat mount with a bolt and nut 2/5" or 5/16" diameter (Purchased separately). Air inlet Air inlet Air outlet Capacity (BTU/h) 9000 12000 18000 22000 28000 33600 26000 34400 Outdoor unit dimension inch(WxHxD) 33-9/25 x 21-6/25 x 12-3/5 33-9/25 x 23-6/25 x 12-3/5 37-3/5 x 27-3/5 x 15-3/5 38-3/5 x 31-1/10 x 16-3/5 38-3/5 x 31-1/10 x 16-3/5 38-3/5 x 31-1/10 x 16-3/5 38-3/5 x 31-1/10 x 16-3/5 42-4/5 x 43-4/5 x 17-3/10 A (inch) B (inch) 21-6/25 22-2/25 24-6/25 26-4/25 26-4/25 26-4/25 26-4/25 31-3/25 11-7/25 14-4/25 15-9/25 17-7/25 17-7/25 17-7/25 17-7/25 18-3/25 Outdoor unit installation 12
![](/manual_guide/products/frigidaire-ffhp223cs2-installation-instructions-e1a8aa2/13.png)