Frigidaire FFMV154CLS Complete Owner's Guide (English) - Page 11

MANUAL COOKING Setting the clock Example: setting clock display for 9:00: 1. Touch Clock pad once for AM, clock touch twice for PM. 2. Enter time using number pads. clock 3. Touch Clock pad again. Setting the timer Example: setting timer for 5 minutes: 1. Touch Timer pad once. timer 2. Enter desired time using number pads. timer 3. Touch Timer pad. Using the Stop/Cancel key This feature will let you quickly stop or cancel the cooking process. Touch the Stop/cancel pad to : stop cancel 1. Erase if you have entered wrong information. 2. Cancel timer. 3. Press pad once to pause the oven temporalily during cooking. (Touch START/ +30 sec pad again to resume cooking.) start + 30 sec 4. Return the time of day (clock) to the display after cooking cycle is completed. 5. Cancel a program during cooking, touch twice. When the timer has reached the end of set time, you will hear beep alerts indicating the timer has run out. Using the Start/+ 30 sec. key Control Lock You may lock the control panel to prevent the microwave from being accidentally started or used by children. This feature will let you quickly start or add 30 seconds Touch the START/+30sec. pad to : 1. Start programmed cooking. start + 30 sec The control lock feature is very useful when cleaning the control panel. The lock will prevent accidental programming when wiping the control panel clean. 2. Start cooking for 30 seconds at 100% power level. Example: to set the control lock ON: Touch and hold the Stop/Cancel pad for more stop than 3 seconds. The Lock icon will appear in cancel the display window along with 2 beeps. hold for 3 seconds Example: to change the control lock from ON to OFF: Touch and hold the Stop/Cancel pad for more than 3 seconds. The Lock icon will disappear in the display window. stop cancel hold for 3 seconds 3. Extend cooking time in multiples of 30 seconds each time this pad is touched during microwave cooking. Example: to add 1 minute of cook time during 80% microwave cooking : Press START/ +30 sec pad twice. start + 30 sec 11