Frigidaire FFSS2615TS Complete Owner s Guide - Page 8
To Remove Freezer Door - parts
View all Frigidaire FFSS2615TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
DOOR REMOVAL INSTRUCTIONS - STYLE 1 To Remove Freezer Door: 1. Disconnect water line coming from lower hinge of freezer door at connection located under front of freezer: Press outer ring against face of fitting, then pull to remove tube. 2. Remove top hinge cover screw on freezer door and remove cover. 3. Disconnect wiring harness connector plug at top hinge: place your thumbs on flat sides of each connector and bend both parts back and forth, then with firm grasp, pull both pieces apart. 4. Trace around hinge with soft lead pencil. This will make it easier to realign doors when they are replaced. 5. Remove top hinge, allowing wiring harness to pull through hinge and lift freezer door off of bottom hinge pin. Lay door down flat to avoid kinking water line. 6. Remove bottom hinge, if necessary. 7. Reverse this procedure to reinstall freezer door. When both doors have been reinstalled, connect water line by inserting tube and push until mark touches face of fitting, replace toe grille and plug in electrical power cord. Turn both temperature controls to center position. Adjust settings as necessary. To Disconnect 1. Press outer ring against face of fitting 2. Pull to remove tube To Connect Insert tube and push until mark touches face of fitting Door Hinge Assembly Water Line Tubing Screws 8