Frigidaire FFTA103WA1 Installation Instructions - Page 8
Non-Frigidaire Dual Intake Grille
View all Frigidaire FFTA103WA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installation Instructions Non-Frigidaire Dual Intake Grille In cases where the existing sleeve is a non-Frigidaire sleeve but is installed with a dual intake grille. The existing grille may be left in place. Make sure the outer 3 ½" to 4 ½" louvers are angled from the left and right sides of the sleeve toward the center. (See Fig. 1). This provides proper flow of outside air into the unit. Fig. 1 From the installation kit, apply two 1" x ¾" x 14" seals along the flat metal flange of the condenser. (See Fig. 2). Fig. 2 Insert the unit with the seals into the sleeve pushing it all the way to rear making sure the seal are against the rear grille. The seals are necessary to reduce recirculation of hot exhaust air into the intakes which would reduce system performance. 8