Frigidaire FFTW1001P Installation Instructions - Page 5
Installation in a Recess or Closet, Drain system requirements - dryer
View all Frigidaire FFTW1001P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
INSTALLATION REQUIREMENTS Drain system requirements 1 Drain capable of eliminating 17 gals (64.3 L) per minute. 2 A standpipe diameter of 1-1/4 in. (3.18 cm) minimum. 3 The standpipe height above the floor should be: Minimum height: 36 in. (91 cm) Maximum height: 96 in. (244 cm) Installation in a Recess or Closet If washer and dryer are installed in the same closet, door ventilation is required: A minimum of 120 square inches (774.2 cm²) of opening, equally divided at the top and bottom of the door, is required. Louvered openings should be located 3 inches (7.6 cm) from bottom and top of door. Air openings are required to be unobstructed when a door is installed. A louvered door with equivalent air openings for the full length of the door is acceptable. 3" (7.6cm) 60 sq. in. (387.1cm²) 96" (244 cm) max. 36" (91 cm) min. NOTE For installations requiring a longer drain hose, have a qualified technician install a longer drain hose (according to your model number) available from an authorized parts distributor. For drain systems in the floor, install a syphon break kit available from your local hardware store. 3" (7.6cm) closet door 60 sq. in. (387.1cm²) 5