Frigidaire FFTW1001P Installation Instructions - Page 6

INSTALLATION REQUIREMENTS Clearance requirements IMPORTANT DO NOT INSTALL YOUR WASHER: 1 In an area exposed to dripping water or outside weather conditions. The ambient temperature should never be below 60° F (15.6° C) to maximize detergent effectiveness. 2 In an area (garage or garage-type building) where gasoline or other flammables (including automobiles) are kept or stored. 3 On carpet. Floor MUST be solid with a maximum slope of 1 inch (2.5 cm). To minimize vibration or movement, reinforcement of the floor may be necessary. MINIMUM INSTALLATION CLEARANCES - Inches (cm) SIDES REAR TOP FRONT Alcove Closet 0" (0 cm) 0" (0 cm) 0" (0 cm) 0" (0 cm) 20.5" (52 cm) 20.5" (52 cm) n/a 1" (2.5 cm) 0" (0 cm) 0" (0 cm) 1" (2.5 cm) 0" (0 cm) 20.5" (52 cm) Washer Dimensions power cord attachment location on rear of unit1 59" (150 cm) to clear open lid drain hose retainer on rear of washer2 water supply connection on rear of washer 38.5" (98 cm) 42" (107 cm) 26.25" (67 cm) 1Power supply cord length approximately 60 inches (152.5 cm). 2Loose drain hose length beyond hose retainer approximately 61 inches (155 cm). 6 28.75" (78 cm)