Frigidaire FGGF3047TF Complete Owner s Guide - Page 13

BEFORE SETTING SURFACE CONTROLS Assembly of the burner caps Make sure that all of the surface burner caps and surface burner grates are installed correctly and at the correct locations. 1. Remove all packing material from the cooktop area. 2. Make sure burner caps are properly placed on the surface burners. 3. Unpack the burner grates and position them on the cooktop. 4. Discard all packing material. On round-style burners, the burner cap lip (Figure 1) should fit snug into the center of the burner head and rest level. Refer to Figure 2 for correct and incorrect burner cap placement. Once in place, you may check the fit by gently sliding the burner cap from side to side (Figure 3) to be sure it is centered and firmly seated. When the burner cap lip makes contact inside the center of the burner head you will be able to hear the burner cap click. Figure 3: Gently move cap for proper placement Burner cap Burner cap Burner cap lip Burner head Burner head Figure 1: Burner caps and burner heads IMPORTANT Please note that the burner cap should not move off the center of the burner head when sliding from side to side. • Check and be sure that all oval-style burner caps (some models) are correctly in place on oval burner heads. • Do not use the surface burners without the burner caps properly installed. Improperly seated burner caps may prevent burners from lighting or cause uneven flame and heating. • Missing pieces or improper installation may lead to spills, burns, or damage to your range and cookware. • Never place flammable items on the cooktop. Figure 2: Proper burner cap placement CAUTION • Do not allow spills, food, cleaning agents, or any other material to enter the gas orifice holder opening. • Always keep the burner caps and burner heads in place whenever the surface burners are in use. • Never place flammable items on the cooktop. 13