Frigidaire FGGF3047TF Complete Owner s Guide - Page 31

To set a self clean cycle, To stop or interrupt a self clean cycle

Page 31 highlights

SETTING OVEN CONTROLS To set a self clean cycle 1. Press Self Clean. ------ will appear in the display 2. Press until 3:00 appears in the display for a 3 hour self clean process, or push until 2:00 appears in the display for a 2 hour self clean. 3. As soon as the controls are set, the motor driven lock will begin to close automatically and the door locked indicator light will flash. Do not open the oven door while the light is flashing (allow about 15 seconds for the oven door to lock). 4. CLn will appear in the display during the self clean cycle, and the door locked light will glow until the self cleaning cycle is complete or cancelled and the oven temperature has cooled. When the self clean cycle has completed: 1. The time of day will appear in the display window and the door locked light will continue to glow. 2. Once the oven has cooled down for about 1 hour and the door locked light has gone out, the oven door may be opened. To stop or interrupt a self clean cycle (once it has been activated): 1. Press OFF. 2. Once the oven has cooled down for about 1 hour and the door locked light has turned off, the oven door can be opened. 3. Restart the self clean cycle once all conditions have been corrected. NOTE Whenever the self clean feature is active, you may check the amount of time remaining in the self clean cycle by pressing the self clean key. Remember the range door cannot be opened until the range has cooled sufficiently. You will need to add about 1 hour to the time displayed before you can use the range for cooking. When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel. CAUTION Stand to the side of the oven when opening the door after a self clean. The oven may still be hot and could cause burns. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

31
SETTING OVEN CONTROLS
To set a self clean cycle
1.
Press
Self Clean
.
------
will appear in the display
2.
Press
until
3:00
appears in the display for a 3
hour self clean process, or push
until
2:00
appears in the display for a 2 hour self clean.
3.
As soon as the controls are set, the motor driven lock
will begin to close automatically and the
door locked
indicator light will flash. Do not open the oven door
while the light is flashing (allow about 15 seconds for
the oven door to lock).
4.
CLn
will appear in the display during the self clean
cycle, and the
door locked
light will glow until the self
cleaning cycle is complete or cancelled and the oven
temperature has cooled.
When the self clean cycle has completed:
1.
The time of day will appear in the display window and
the
door locked
light will continue to glow.
2.
Once the oven has cooled down for about 1 hour and
the
door locked
light has gone out, the oven door may
be opened.
To stop or interrupt a self clean cycle
(once it has
been activated)
:
1.
Press
OFF
.
2.
Once the oven has cooled down for about 1 hour and
the
door locked
light has turned off, the oven door can
be opened.
3.
Restart the self clean cycle once all conditions have
been corrected.
Stand to the side of the oven when opening the door after
a self clean. The oven may still be hot and could cause
burns.
CAUTION
Whenever the self clean feature is active, you may check
the amount of time remaining in the self clean cycle by
pressing the
self clean
key.
Remember the range door cannot be opened until the
range has cooled sufficiently. You will need to add about 1
hour to the time displayed before you can use the range
for cooking.
When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.
NOTE