Frigidaire FGHT2055VF Complete Owners Guide - Page 11

11 DOOR REMOVAL  NOTE * We do not recommend to using an electric tool to unscrew and screw parts because it may damage the screw threads or cause screw heads to be stripped off. However, if you have an electric tool with torque control, the torque cannot be larger than 6 N·m (53 in.lb). 9. Remove both lower hinge covers. 10. Remove the screw from the door stopper with a Phillips screwdriver (see Figure 5). 11. Unscrew the bottom hinge pin from the right-hand position using an adjustable wrench (see Figure 5).  NOTE Keep the screws so they can be used on the opposite side. IMPORTANT Place the door on a padded surface to avoid damage. 5. Unscrew the center hinge pin using an adjustable wrench and set it aside (see Figure 3). 6. Open the refrigerator door and lift the door off of the bottom hinge pin. Set the door aside. 7. Remove the 3 center hinge screws using a Phillips screwdriver and set the center hinge aside (see Figure 3). Door Stopper Door Stopper Screw Bottom Hinge Pin Figure 5 12. Install the bottom hinge pin in the left-hand hole of the left-hand lower hinge (see Figure 6). 13. Flip the door stopper. Reinstall the door stopper on top of the bottom hinge with the screw (see Figure 6). Hinge Hole Plug Hinge Pin Screws Center Hinge Figure 3 8. Remove the 3 pan head screws on the opposite side of the center hinge (Figure 4) and install them in the holes where the center hinge was attached. Figure 4 Figure 6