Frigidaire FGHT2055VF Complete Owners Guide - Page 12
Door Bearing Reversal For, Freezer and Refrigerator Doors, DOOR HANDLE INSTALLATION
![]() |
View all Frigidaire FGHT2055VF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 DOOR REMOVAL Door Bearing Reversal For Freezer and Refrigerator Doors 1. With a flathead screwdriver, pry out the center hinge bearing from the top of the refrigerator door (see Figure 7A). 2. With a flathead screwdriver, pry out the center hinge bearing plug from the opposite side of the refrigerator door (see Figure 7B). B 9. Repeat steps 1-8 for the freezer door. 10. Lower the refrigerator door in the opened position on the bottom hinge pin and close the door (see Figure 9). 2 1 A Figure 7 3. Install the hinge bearing on the opposite side by tapping it with a hammer until it is flush with the end cap. Repeat the process for the plug. 4. Reverse the door handle (see DOOR HANDLE INSTALLATION section if applicable). 5. Flip the refrigerator door over and remove the screw from the door closer using a Phillips screwdriver and set it aside (see Figure 8A). 6. Pry out the hinge bearing from the door with a straight screwdriver (see Figure 8B). 7. Install the bottom hinge bearing on the opposite side of the door (see Figure 8C). 8. Flip the door closer over and install on the opposite side of the door (see Figure 8C). Figure 9 11. Screw in and tighten the center hinge pin using an adjustable wrench. 12. Lower the freezer door in the opened position over the center hinge pin and close the door (see Figure 10). 2 1 Figure 10 Place the lower hinge cover between the freezer door and refrigerator door to keep it level while attaching the top hinge (see Figure 11). A B Door Closer Door Bottom C Figure 11 Figure 8
![](/manual_guide/products/frigidaire-fght2055vd-complete-owners-guide-eb916da/12.png)