Frigidaire FGIC13P3KS Complete Owner's Guide (English) - Page 9

TROUBLESHOOTING If your induction burner stops working properly, use the table below to identify the cause of the problem. Take any steps that can be carried out in the home. If this does not lead to an improvement, contact a Frigidaire at 1-866-312-2117. After power is supplied, the "ON/OFF" indicator lamp fails to light up. Check to ensure the plug is inserted tightly. Check to ensure the switch, socket, fuse and power line are in good condition. The "ON/OFF" indicator lamp lights up, but heating does not start. Verify that the cookware materials is acceptable. Other reasons, contact Frigidaire at 1-866-312-2117 The touch keys do not work. The burner controls may be locked. Unlock the keys by pressing the "Lock" key. Otherwise, call 1-866-312-2117 The food gets very hot. Incorrect power setting or maybe power programmed incorrectly. Adjust the power to a lower level. The food does not get hot enough. Incorrect power setting or maybe power programmed incorrectly. Adjust the power to a higher level. The cookware being used is very light or are bent. Use good-quality cookware with a thick, flat base. Heating stops suddenly during operation. The ambient temperature is too high, please allow the unit to cool down and try again. The air entry or the air vent is blocked. Remove cookware from unit. Allow unit to cool down and move to open area Unit timer has reached setting. Please restart the unit The system protection functions are activated, wait for a moment then restart, it will operate as usual. Activated (See page 8) Code of failure: E1, E2, E3, E4, E5, E6, E7, E8 ,EB and EC E3 and E6: Wait a moment and press the "ON/OFF" button when the temperature of the cooker becomes normal, the induction cooker will operate as usual. E7 and E8: Turn "OFF" the cooker, when the voltage become normal turn ON the cooker, it will operate as usual E1, E2, E4, E5, EB and EC: Please contact Frigidaire at 1-866-312-2117 Malfunction code:E1-EC Code Malfunction EC Blower seized/ blocked Shorting failure of main temperature sensor Open-circuit failure of auxiliary temperature sensor Higher temperature of auxiliary temperature sensor Higher voltage Code EB Malfunction Open-circuit failure of main temperature sensor Higher temperature of main temperature sensor Shorting failure of auxiliary temperature sensor Lower voltage Main temperature sensor not worked 9