Frigidaire FGID2479SD Complete Owners Guide - Page 3

Product Registration - dishwasher

Page 3 highlights

PRODUCT REGISTRATION Thank you for choosing Frigidaire This Use & Care Guide is part of our commitment to customer satisfaction and product quality throughout the service life of your new appliance. We view your purchase as the beginning of a relationship. To ensure our ability to continue serving you, please use this page to record important product information Purchase Date Model Number Serial Number Registering your product with Frigidaire enhances our ability to serve you. You can register online at www.frigidaire.com or by dropping your Product Registration Card in the mail.  NOTE Not all cycles and options available on all models.  NOTE Why Energy Efficient Units run long cycles: Several factors are important to washing dishware. The energy use of the dishwasher was reduced by applying more of the factors that don't use so much energy and less of the ones that use more. As a result, you will see that the wash cycles take longer. CAUTION Property Damage Hazard Before starting dishwasher be sure that the water is connected and turned on. Failure to do so may cause damage to the pump seal and result in water leakage.  NOTE Very Important Information Read Before Operating Your Dishwasher! Normal Operating Sounds This dishwasher does not sound like most dishwashers - IT'S QUIETER. Your Direct Feed Wash System dishwasher uses energy efficient motors for the wash and drain portions of the cycle you select. Each cycle has a series of water fills and drains for washing and rinsing dishes. As each cycle begins, you may-or may not- hear the drain motor. The next sound you will hear is the splashing water as it enters the tub. PLEASE BE ADVISED: If you compare this dishwasher to previous models, you may be surprised at what you DON'T hear. Getting Started 1. Load Dishwasher (See Preparing and Loading Dishes). 2. Add detergent (See Dishwasher Dispenser & Detergents). 3. Add Rinse Aid, if needed (See Rinse Aid). 4. Run hot water faucet nearest dishwasher until water is hot. Turn water off. 5. Select desired CYCLE (See Cycle Chart). 6. Select desired OPTION (See Option Selections). 7. To start, press START/CANCEL and close door immediately.  NOTE If the dishwasher door is opened while the unit is running, the START/CANCEL pad must be pressed and the door shut immediately to return the unit to the selected cycle and option. This must happen within 10 minutes for the unit to continue the cycle.  NOTE The dishwasher is programmed to remember your last cycle so you do not have to reset each time. To start the dishwasher using the same cycle and options selected on the previous wash, just press the START/CANCEL pad. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

CAUTION
Property Damage Hazard
Before starting dishwasher be sure that the wa-
ter is connected and turned on. Failure to do so
may cause damage to the pump seal and result
in water leakage.
3
PRODUCT REGISTRATION
Thank you for choosing
Frigidaire
This Use & Care Guide is part of our commitment
to customer satisfaction and product quality
throughout the service life of your new appliance.
We view your purchase as the beginning of a
relationship.
To ensure our ability to continue
serving you, please use this page to record
important product information.
_________________________________
Purchase Date
_________________________________
Model Number
_________________________________
Serial Number
Registering your product with Frigidaire enhances
our ability to serve you. You can register online
at
www.frigidaire.com
or by dropping your
Product Registration Card in the mail.
NOTE
The dishwasher is programmed to remember
your last cycle so you do not have to reset each
time.
To start the dishwasher using the same
cycle and options selected on the previous
wash, just press the
START/CANCEL pad.
NOTE
Not all cycles and options available on all models.
NOTE
Very Important Information
Read Before Operating Your Dishwasher!
Normal Operating Sounds
This dishwasher does not sound like most dish
-
washers
- IT’S QUIETER.
Your Direct Feed Wash System dishwasher uses
energy efficient motors for the wash and drain
portions of the cycle you select.
Each cycle has
a series of water fills and drains for washing
and rinsing dishes.
As each cycle begins, you
may-or may not- hear the drain motor.
The next
sound you will hear is the splashing water as it
enters the tub.
PLEASE BE ADVISED:
If you compare this
dishwasher to previous models, you may be
surprised at what you DON’T hear.
NOTE
Why Energy Efficient Units run long cycles:
Sev-
eral factors are important to washing dishware.
The energy use of the dishwasher was reduced
by applying more of the factors that don’t use
so much energy and less of the ones that use
more.
As a result, you will see that the wash
cycles take longer.
Getting Started
1.
Load Dishwasher (See Preparing and
Loading Dishes).
2.
Add detergent (See Dishwasher Dispenser
& Detergents).
3.
Add Rinse Aid, if needed (See Rinse Aid).
4.
Run hot water faucet nearest dishwasher until
water is hot.
Turn water off.
5.
Select desired CYCLE (See Cycle Chart).
6.
Select desired OPTION (See Option Selections).
7.
To start, press
START/CANCEL and close
door immediately.
NOTE
If the dishwasher door is opened while the
unit is running, the START/CANCEL pad must
be pressed and the door shut immediately to
return the unit to the selected cycle and option.
This must happen within 10 minutes for the
unit to continue the cycle.