Frigidaire FGID2479SD Complete Owners Guide - Page 7

Status Window OPERATING INSTRUCTIONS The STATUS window, available on some models, indicates the following activity: 1-24 Number of delay start hours. The last hour will count down in minutes. CLOSE Close will scroll across the status window indicating the door needs to be closed. MINUTES Number of minutes left in cycle (1-199). L0----L6 Level of Rinse Aid dosage. PRESS START � Press start will scroll across the status window indicating the START/CANCEL pad needs to be pressed. User Instruction Code Instruction Code Displayed Close Problem This indicates the door has been left open or not properly latched. Solution Ensuring the door is properly latched will clear the display. This does not indicate a problem with your dishwasher and service will not need to be contacted. Error Code Displayed Error Code* i10 i20; i40; iF0 i30 i50 i60 iC0 Problem Solution A low fill has been detected. Look for a pinched water supply line, or water shutoff is not completely opened. Clogged filters or a restricted drain line has been detected. Check and clean both filters and sump area and check for a pinched or blocked drain hose. If the drain line is attached to a disposer, check that the knockout plug has been removed. A leak or overflow of water has been detected in the bottom pan. Look for loose connections at the water inlet valve and ensure the unit is properly leveled. A problem has been detected with the drain or wash motor. A problem has been detected with the water heating system. Pressing the cancel button or turning power off at the breaker for 5 min. should clear this error code and the unit can be restarted. If this does not resolve the problem, service will need to be called. A problem has been detected with the electronic control system. *In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for 5 min. does not resolve the problem, contact the Frigidaire Customer Care Center at 1-800-374-4432. 7