Frigidaire FGRU19F6QF Complete Owner's Guide - Page 13

Changing The Filter, Interior Lighting - parts

Page 13 highlights

CHANGING THE FILTER INTERIOR LIGHTING PURE ADVANTAGE™ Air Filter Your new Pure Advantage air filter is located inside one of the 2-Liter Door Bins. The air filter cover is located on the upper right side of the control box. In general, you should change the air filter with Part Number "EAFCBF" every 6 months to ensure optimal filtering of freezer odors. The replacement air filter can be purchased on the Frigidaire website (http://frigidaire.stores.yahoo.net) or call toll free in the U.S. and Canada: 1-800-599-7569. Your electronic control is equipped with a Replace Air Filter indicator to remind you to change your filter. To Install Or Replace The Air Filter • Pull down on the front of the Pure Advantage™ air filter cover to release the hinged bottom cover. • Allow bottom cover to swing open and then remove the old filter and discard it. • Unpackage the new filter and place it inside the hinged bottom cover of the housing. • Push the hinged bottom cover upward until the tab snaps into closed position. The mid level and upper level lighting comes on automatically when the door is opened. IMPORTANT To disconnect power to the unit, unplug the unit or switch the breaker that supplies power to the unit to the off position. Replace the old bulb with a bulb of the same wattage. To replace the light bulbs: 1. To replace the light bulb, turn the temperature control to OFF and unplug the electrical cord. 2. Remove the lens from the lamp housing by unsnapping it from the lamp housing using your fingers or a screwdriver. Be careful not to break the locking tabs on the lamp housing. 3. Replace the old bulb with a bulb of the same type and wattage. 4. To replace the lens, snap one side of the lens opening to the tab on the lamp housing. Then carefully attach the other side. hold to reset air filter replace air filter temp mode press & hold alarm off colonctrkol To Remove Light Lens Press Tabs in Direction Shown Mid Level Lighting Open Air Filter Cover Mid-Level Lighting Light Bulb Removal Air Filter Remove Air Filter 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

13
Mid-Level Lighting Light Bulb Removal
To Remove Light Lens
Press Tabs
in Direction Shown
Mid Level Lighting
PURE ADVANTAGE™ Air Filter
Your new Pure Advantage air filter is located inside
one of the 2-Liter Door Bins. The air filter cover is
located on the upper right side of the control box.
In general, you should change the air filter with
Part Number “EAFCBF” every 6 months to ensure
optimal filtering of freezer odors. The replacement
air filter can be purchased on the Frigidaire website
in the U.S. and Canada: 1-800-599-7569. Your
electronic control is equipped with a Replace Air
Filter indicator to remind you to change your filter.
To Install Or Replace The Air Filter
• Pull down on the front of the Pure
Advantage™ air filter cover to release the
hinged bottom cover.
• Allow bottom cover to swing open and then
remove the old filter and discard it.
Unpackage the new filter and place it inside
the hinged bottom cover of the housing.
• Push the hinged bottom cover upward until
the tab snaps into closed position.
e air filter
o reset
press & hold
ir
er
temp
mode
alarm
off
control
lock
Open Air Filter Cover
Air Filter
Remove Air Filter
The mid level and upper level lighting comes on
automatically when the door is opened.
IMPORTANT
To disconnect power to the unit, unplug the
unit or switch the breaker that supplies power
to the unit to the off position. Replace the old
bulb with a bulb of the same wattage.
To replace the light bulbs:
1. To replace the light bulb, turn the
temperature control to OFF and unplug the
electrical cord.
2. Remove the lens from the lamp housing by
unsnapping it from the lamp housing using
your fingers or a screwdriver. Be careful not to
break the locking tabs on the lamp housing.
3. Replace the old bulb with a bulb of the same
type and wattage.
4. To replace the lens, snap one side of the
lens opening to the tab on the lamp housing.
Then carefully attach the other side.
CHANGING THE FILTER
INTERIOR LIGHTING