Frigidaire FGRU19F6QF Complete Owner's Guide - Page 20

BEFORE YOU CALL PROBLEM CAUSE CORRECTION "Sb" is • The control is in displayed on Sabbath Mode. control. • Pressing the CONTROL LOCK and TEMP MODE keys to exit Sabbath Mode. SOUND AND NOISE Louder sound levels whenever appliance is on. • Appliance operates at higher pressures during the start of the ON cycle. • This is normal. Sound will level off or disappear as appliance continues to run. Popping or cracking sound when compressor comes on. Bubbling or gurgling sound. • Metal parts undergo • This is normal. Sound will level off or expansion and contraction, as disappear as appliance continues to run. in hot water pipes. • Refrigerant (used to cool refrigerator) is circulating throughout the system. • This is normal. Vibrating or • Appliance is not level. It rocks • Level the appliance. Refer to rattling noise. on the floor when it is moved "Leveling" section. slightly. • Floor is uneven or weak. • Ensure floor can adequately support the appliance. Level the appliance by putting wood or metal shims under part of the appliance. • Appliance is touching the wall. • Re-level appliance or move appliance slightly. Refer to "Leveling" in the INSTALLATION section. WATER / MOISTURE / FROST INSIDE APPLIANCE Moisture forms on inside appliance walls. • Weather is hot and humid, which increases internal rate of frost buildup. • Door is slightly open. • Door is kept open too long. • This is normal. • See "DOOR PROBLEMS". • Open the door less often. ODOR IN APPLIANCE Odors in appliance. • Interior needs to be cleaned. • Clean interior with sponge, warm water, and baking soda. Replace air filter. • Foods with strong odors are • Cover the food tightly. in the appliance. DOOR PROBLEMS Door will not close. • Appliance is not level. It rocks on the floor when it is moved slightly. • This condition can force the cabinet out of square and misalign the door. Refer to "Leveling" section. • Floor is uneven or weak. • Ensure floor can adequately support appliance. Level the appliance by putting wood or metal shims under part of the appliance. LIGHTING PROBLEMS Light bulb is • The light bulb is burned out. • Follow directions under INTERIOR not on. LIGHTING section. • No electric current is reaching • See "Appliance does not run". the appliance. • Control is in Sabbath mode • Depress TEMP MODE key and CONTROL (Sb is displayed on control). LOCK key for 3 seconds. 20