Frigidaire FHPC102AB1 Complete Owners Guide - Page 13

Operating Instructions How to Use the Remote Control TURNING THE UNIT ON Plug in the unit, then press the "on·off" button (when turned on, the unit will operate as the last setting before shutdown. To switch the unit off, press "on·off" button again, then remove the plug. Do NOT switch the unit off by removing the plug. Always switch the unit off by pressing the "on·off" button and wait for few minutes before removing the plug. Cool mode Press the "mode" button until the left side of LCD screen displays "cool". Press the " fan speed" button to choose the fan speed "auto", "high", "mid", and "low". Press the " " and " "button to choose the temperature you want. Dry mode Press the "mode" button until the left side of LCD screen displays "dry". In this mode, the " " or " " button is disabled and the screen will remain blank. The unit will continuously drain moisture from the room. Note: In this mode, the fan speed will be set as "low" automatically, which cannot be changed. In this mode, condensate drainage are required, refer to the "Drainage Instructions" on Page 16-17 for more instructions to drain the excess condensate. Fan mode Press the "mode" button until the left side of LCD screen displays "fan". In this mode, you can select fan speed "high", "mid", "low" by pressing the Fan speed button and referring to the diagram. Note: In this mode, the air exhaust hose does not need to be connected.