Frigidaire FMOS1745BS Complete Owners Guide - Page 11

from one stage to another automatically (2 stages maximum). Example: to cook food for 3 minutes at 80% power and then 50% power for 6 minutes 30 seconds: 1. Press TimeCook. 2. Use the number pads to enter heating time for the 1st stage (cook time may be set up to 99 minutes and 99 seconds). 3. Press Power Level pad once. 4 .Use the number keys to enter power level for the 1 st stage. P-80 appears in the display {80 % power). 5. Press Time Cook pad for 2nd stage. 6. Use the number pads to enter heating time for the 2nd stage {cook time may be set up to 99 minutes and 99 seconds). 7. Press Power Level pad for 2nd stage. 8. Use the number key to enter power level for the 2nd stage. P-50 appears in the display ( 50 % power). 9. press START pad. When heating has finished you will hear beeps and "End" will display. NOTE Power level must always be programmed for first stage. USING THE STOP/CANCEL KEY This feature will let you quickly stop or cancel the cooking process. 11 OPERATION 1. Press the Stop pad to: 2. Erase if you have entered wrong information. 3. Cancel timer setting process 4 Press pad once to pause the oven temporarily during cooking. (Press START pad again to resume cooking). 5. Return the time of day (clock) to the display after cooking cycle is completed. 6. Cancel a program during cooking, press twice. USING THE +10 SEC /+ 30 SEC KEY This feature will let you quickly start or add 10 or 30 seconds Press the +10 sec/+30 sec pad to: +10 Sec / +30 Sec 1. Start programmed cooking. 2. Start cooking for 10 seconds/30 seconds at 100% power level. 3. Extend cooking time in multiples of 10 seconds/30 seconds each time this pad is pressed during microwave cooking. Example: to add 1 minute of cook time during 100% microwave cooking : 1. Press the +10 sec/+30 sec pad to: NOTE "Food" will be displayed if a quick start cooking cycle or + 10 Sec / +30 Sec key is pressed more than 5 minutes after the door of microwave oven is closed. You must open t hen close the door again to clear ''Food'' from the display. SETTING DEFROST (BY WEIGHT) Example: to defrost 1lb. of food with the default power level and cook time determined automatically: