Frigidaire FMOS1745BS Complete Owners Guide - Page 18

Cleaning And Care

Page 18 highlights

18 CLEANING AND CARE Disconnect the power cord or leave the door open to deactivate the oven during cleaning. Disconnect the power cord before replacing filters and lights. EXTERIOR The outside surface is precoated steel and plastic. Clean the outside with mild soap and water; rinse and dry with a soft cloth. Do not use any type of household or abrasive cleaner. DOOR Wipe the window on both sides with a soft cloth to remove any spills or spatters. Metal parts will be easier to maintain if wiped frequently with a soft cloth. Avoid the use of spray and other harsh cleaners as they may stain, streak or dull the door surface. EASY CARE™ STAINLESS STEEL/ SMUDGE.PROOF™ STAINLESS STEEL / BLACK STAINLESS STEEL(some models) Your microwave oven(some models) may have a Stainless Steel finish or coating. Clean the stainless with warm soapy water using a clean sponge or cloth. Rinse with clean water and dry with a soft clean cloth. DO NOT use ANY store bought cleaners like Stainless Steel cleaners or any other types of cleaners containing any abrasive, chlorides, chlorines or ammonia. It is recommended to use mild dish soap and water or a 50/50 solution of water and vinegar. TOUCH CONTROL PANEL Care should be taken in cleaning the touch control panel. If the control panel becomes soiled, open the microwave oven door before cleaning. Wipe the panel with a cloth dampened slightly with water only. Dry with a soft cloth. Do not scrub or use any sort of chemical cleaners. Close door and touch STOP/Cancel WAVEGUIDE COVER The waveguide cover is located on the right side in the microwave oven cavity. It is made from mica so requires special care. Keep the waveguide cover clean to assure good microwave oven performance. Carefully wipe with a damp cloth any food spatters from the surface of the cover immediately after they occur. Built-up splashes may overheat and cause smoke or possibly catch fire. DO NOT REMOVE THE WAVEGUIDE COVER. ODOR REMOVAL Occasionally, a cooking odor may remain in the microwave oven. To remove, combine 1 cup water, grated peel and juice of 1 lemon in a 2-cup glass measuring cup. Boil for several minutes using 100% power. Allow to set in microwave oven until cool. Wipe interior with a soft cloth. TURNTABLE/TURNTABLE SUPPORT The turntable and turntable support can be removed for easy cleaning. Wash them in mild, sudsy water; for stubborn stains use a mild cleanser and non-abrasive scouring sponge. They are also dishwasher-proof. Use upper wirerack of dishwasher. The turntable motor shaft is not sealed, so excess water or spills should be wiped up immediately. INTERIOR Cleaning is easy because little heat is generated to the interior surfaces . To clean the interior surfaces, wipe with a soft cloth and warm water. DO NOT USE ABRASIVE OR HARSH CLEANERS OR SCOURING PADS. For heavier soil, use baking soda or a mild soap; rinse thoroughly with hot water. The round wire rack and shelf can be cleaned with hot soapy water, rinsed and dried.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

18
CLEANING AND CARE
Disconnect the power cord or leave the door open to deactivate the oven during
cleaning. Disconnect the power cord before replacing filters and lights.
EXTERIOR
The outside surface is precoated steel and plastic.
Clean the outside with mild soap and water; rinse
and dry with a soft cloth. Do not use any type of
household or abrasive cleaner.
DOOR
Wipe the window on both sides with a soft cloth
to remove any spills or spatters. Metal parts will
be easier to maintain if wiped frequently with a
soft cloth. Avoid the use of spray and other harsh
cleaners as they may stain, streak or dull
t
he door
surface.
EASY CARE™ STAINLESS STEEL/
SMUDGE.PROOF™ STAINLESS STEEL /
BLACK STAINLESS STEEL(some models)
Your microwave oven(some models) may have a
Stainless Steel finish or coating.
Clean the stainless
with warm
soapy water using a clean sponge or
cloth. Rinse with clean water and dry with a soft
clean cloth. DO NOT use ANY store bought
cleaners like Stainless Steel cleaners or any other
types of cleaners containing any abrasive,
chlorides, chlorines or ammonia. It is recommended
to use mild dish soap and water or a 50/50 solution
of water and vinegar.
TOUCH CONTROL PANEL
Care should be taken in cleaning the touch control
panel. If the control panel becomes soiled, open the
microwave oven door before cleaning. Wipe the
panel with a cloth dampened slightly with water
only. Dry with a soft cloth. Do not scrub or use any
sort of chemical cleaners. Close door and touch
STOP/Cancel
INTERIOR
Cleaning is easy because little heat is generated
to the interior surfaces . To clean the interior
surfaces, wipe with a soft cloth and warm water. DO
NOT USE ABRASIVE OR HARSH CLEANERS OR
SCOURING PADS. For heavier soil, use baking soda
or a mild soap; rinse thoroughly with hot water. The
round wire rack and shelf can be cleaned with hot
soapy water, rinsed and dried.
WAVEGUIDE COVER
The waveguide cover is located on the right side
in
the microwave oven cavity. It is made from mica
so
requires special care. Keep the waveguide cover
clean to assure good microwave oven performance.
Carefully
wipe with a damp cloth any food spatters
from the surface
of the cover immediately after
they occur. Built-up splashes may overheat and
cause smoke or possibly catch fire.
DO NOT
REMOVE THE WAVEGUIDE COVER.
ODOR REMOVAL
Occasionally, a cooking odor may remain in the
microwave oven. To remove, combine 1 cup water,
grated peel and juice of 1 lemon in a 2-cup glass
measuring cup.
Boil for several minutes using 100% power.
Allow to set in microwave oven until cool. Wipe
interior with a soft cloth.
TURNTABLE/TURNTABLE SUPPORT
The turntable and turntable support can be
removed for easy cleaning. Wash them in mild,
sudsy water; for stubborn stains use a mild
cleanser and non-abrasive scouring sponge. They
are also dishwasher-proof. Use upper wirerack
of dishwasher. The turntable motor shaft is not
sealed, so excess water or spills should be wiped up
immediately.