Frigidaire FPEH3077RF Installation Instructions - Page 4
B. Drill Pilot Holes and Fasten Bracket, C. Level and position the range
View all Frigidaire FPEH3077RF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
30" ELECTRIC RANGE INSTALLATION INSTRUCTIONS B. Drill Pilot Holes and Fasten Bracket - Drill a 1/8" pilot hole where screws are to be located. If bracket is to be mounted to the wall, drill pilot hole at an approximate 20° downward angle. If bracket is to be mounted to masonry or ceramic floors, drill a 3/16" pilot hole 1-3/4" deep. The screws provided may be used in wood or concrete material. Use a 5/16" nut-driver or flat head screwdriver to secure the bracket in place. FASTEN BRACKET (WALL OR FLOOR MOUNTING) 1-1/4" Max. Leveling leg Wall mount C. Level and position the range - Slide range to its final position. Insert the range leveling leg in the antitip bracket. Visually verify if the anti-tip bracket is engaged. Lower the range by adjusting the 4 leveling legs alternatively until the range is level. Check if the range is level by placing a spirit level on the oven rack. Take 2 readings with the spirit level placed diagonally; take a reading in one direction and then in the other direction. Level the range if necessary by adjusting the leveling legs. Rear of Range Wall Plate Floor Mount Anti-Tip Bracket FASTEN BRACKET (FLOOR MOUNTING ONLY) Leveling leg More than 1-1/4" Range side Figure 3 Rear of Range Wall Floor Mount Anti-Tip Bracket Figure 2 Figure 4 Leg Leveler Raise Lower Figure 5 4