Frigidaire GHWW083WB1 Complete Owners Guide - Page 10
Fault Codes, Check Filter Feature, You Will See, To Change Temperature Display, You Will See,
View all Frigidaire GHWW083WB1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Operating Instructions Operating Instructions (continued) CHECK FILTER FEATURE, YOU WILL SEE: Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The LED (light) will illuminate after 250 hours of operation. To reset after cleaning the filter, hold the "filter reset" button 3 seconds and the light will go off. FAULT CODES: FAULT CODES: DO THIS: HOLD RESET FILTER BUTTON 3 SECONDS If the display reads "AS" , a sensor has failed. Contact your Authorized Frigidaire Service Center. TO CHANGE TEMPERATURE DISPLAY: If the display reads "ES" , a sensor has failed. Contact your Authorized Frigidaire Service Center. YOU WILL SEE: DO THIS: PRESS AND HOLD THE UP/DOWN BUTTONS SIMULTANEOUSLY FOR 3 SECONDS DIMMING DISPLAY: Note: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. After 60 seconds of control inactivity the display and indicator lights will turn off. Press any button on the control panel or remote control and the display will resume. Please note that if the unit is in eco mode and the set temperature has been reached the unit may appear off. However, the unit is on and will continue to sample the air every 10 minutes. To confirm, press any button on the control panel or remote control to illuminate the display to show unit in eco mode. 10 ©2009 Electrolux Home Products, Inc. All rights reserved.