Frigidaire GHWW083WB1 Complete Owners Guide - Page 9

Operating Instructions (continued) TO OPERATE ON FAN ONLY: DO THIS: PRESS MODE BUTTON CHOOSE FAN ONLY COOL FEATURE: Operating Instructions YOU WILL SEE: Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on some models. You can choose any fan speed you prefer. (Except "Auto Fan"). During this function, display will only show the actual room temperature and the set temperature can not be changed. YOU WILL SEE: DO THIS: PRESS MODE BUTTON CHOOSE COOL ECO (ENERGY SAVER) MODE: Note: In this mode, the fan remains on all the time with the compressor cycling on and off when room temperature is reached. DO THIS: PRESS MODE BUTTON CHOOSE ECO The unit is factory set to run in eco (energy saver) mode. We recommend leaving the unit in eco mode to help save energy and money. However, if you would like to switch out of eco mode, touch the button until another mode is selected. In eco mode, the fan will continue to run for 3 minute after the compressor shuts off. The fan then cycles on for 90 seconds at 10 minute intervals until the room temperature is above the set temperature, at which time the compressor turns back on. NOTE: Please note, that if the unit is changed to 'cool' or 'fan only' mode then shut off, the unit will turn back on in eco mode. This is mandatory per government regulations. If the unit is changed to 'cool' or 'fan only' mode and a power failure occurs, once the power is restored the unit will return to 'cool' or 'fan only' mode. ©2009 Electrolux Home Products, Inc. All rights reserved. 9