Frigidaire GLEH1642FS Operating Instructions (Operating Instructions) - Page 5

Before Operating Your Washer, Operating Steps - parts

Page 5 highlights

OPERATING INSTRUCTIONS NORMAL FAST WHITES/ EXTRA RINSE ON OFF COLORS/ Before Operating Your Washer 3. Pretreat stains and heavy soil. Read your washer Use and Care Guide. It has 4. Add laundry load to the wash drum. important safety and warranty information. It also has many suggestions for best washing results. 5. Open the dispenser drawer and add the measured amount of detergent to the To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your washer Use and Care Guide before operating this appliance. detergent compartment. If desired, add liquid bleach and fabric softener to the appropriate compartments. Slowly close dispenser drawer. Drawer should be completely closed for laundry additives to dispense. Operating Steps Read and follow Washing Procedures in your Use and Care Guide. It provides detailed information for preparing the wash load and choosing control settings to ensure best washing results. 1. Sort laundry into loads that can be washed together. 2. Prepare items for washing. 6. Set Temperature switch according to fabric type and soil level of each load. 7. If desired, select Extra Rinse in Whites/ Regular, Colors/Perm Press, or Delicates cycle. 8. Select Final Spin Speed as desired. 9. Push in the cycle selector knob and turn it clockwise to the desired wash cycle and setting. Printed in U. S. A. 10. Start the washer by closing the door and pulling out the cycle selector knob. The washer will not operate with the door open. As a safety measure, the door will automatically lock during the entire wash cycle. When the door is closed, the Door Lock Indicator lights up when the washer starts, and turns off at the end of the cycle. • To stop the washer, push in the cycle selector knob. • To change a cycle, push in the cycle selector knob and turn it clockwise to the desired setting. • Pull out the knob to restart the washer. 11. Remove items when cycle ends. A signal will sound at the end of the cycle. Note: From time to time you may see water in the bleach and fabric softener compartments. This is a result of the siphoning action and is part of the normal operation of the washer. P/N 134578800 (0506)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

Before Operating Your Washer
Read your washer Use and Care Guide.
It has
important safety and warranty information. It also
has many suggestions for best washing results.
To reduce the risk of fire, electric shock,
or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in your washer Use and Care Guide
before operating this appliance.
Operating Steps
Read and follow
Washing Procedures
in your Use
and Care Guide. It provides detailed information for
preparing the wash load and choosing control
settings to ensure best washing results.
1.
Sort laundry into loads that can be washed
together.
2.
Prepare items for washing
.
Printed in U. S. A.
Note:
From time to time you may see water in
the bleach and fabric softener compartments. This
is a result of the siphoning action and is part of
the normal operation of the washer.
P/N 134578800 (0506)
OPERA
OPERA
OPERA
OPERA
OPERA
TING INSTRUCTIONS
TING INSTRUCTIONS
TING INSTRUCTIONS
TING INSTRUCTIONS
TING INSTRUCTIONS
±²³´µ¶
·µ¸¹
±²³´µ¶·
¸¹º¹»¶·
µ¼´»½¾»³¿¶µ
¹ÀÀ
¹¿
3.
Pretreat stains and heavy soil.
4.
Add laundry load to the wash drum.
5.
Open the dispenser drawer and add the
measured amount of detergent to the
detergent compartment.
If desired, add liquid
bleach and fabric softener to the appropriate
compartments. Slowly close dispenser drawer.
Drawer should be completely closed for
laundry additives to dispense.
6.
Set Temperature switch according to fabric
type and soil level of each load.
7.
If desired, select Extra Rinse in Whites/
Regular, Colors/Perm Press, or Delicates
cycle.
8.
Select Final Spin Speed as desired.
9.
Push in the cycle selector knob and turn it
clockwise to the desired wash cycle and
setting.
10.
Start the washer by closing the door and
pulling out the cycle selector knob.
The
washer will
not
operate with the door open.
As a safety measure, the door will
automatically lock during the entire wash
cycle.
When the door is closed, the
Door Lock
Indicator
lights up when the washer starts,
and turns off at the end of the cycle.
To stop the washer, push in the cycle
selector knob.
To change a cycle, push in the cycle
selector knob and turn it clockwise to the
desired setting.
Pull out the knob to restart the washer.
11.
Remove items when cycle ends.
A signal
will sound at the end of the cycle.