Frigidaire GLEQ2152ES Operating Instructions - Page 2
Dryer Features, Cycle Selection Con't, Cycle Adjustments, Drying Temperature - manual
UPC - 012505374036
View all Frigidaire GLEQ2152ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Cycle Selection (Con't) Bulky Select this cycle to dry a comforter, blanket, sleeping bag or similar item.Cool Down is approximately 10 minutes. Timed Dry To manually select the drying time for any load, turn the knob to a numbered setting. Drying times from 15 to 90 minutes are available in 15-minute increments. You will not be able to select a cycle or dryness level. Timed Dry is recommended when using the No Heat option. Note: To change cycles, press PAUSE/CANCEL twice. To avoid fire hazard, do not use heat to dry items containing feathers or down, foam rubber, plastic, or similarly textured, rubber-like materials. Use the No Heat setting only. Cycle Adjustments A suitable combination of drying temperature, dryness level and options will automatically be displayed for each cycle. The settings can be changed before the cycle is started. Those adjustments will automatically be remembered each time that cycle is selected. If a temperature, dryness level or option is not recommened for a cycle, the indicator will not light. See the "Dryer Settings Chart" for more details. If changes are attempted after the cycle starts, the status lights will blink and the signal will beep 3 times. The cycle must be paused before the settings can be changed. Press PAUSE/CANCEL once to pause the cycle and change settings. Drying Temperature For best results, follow the fabric care label instructions on items to be dried. To change the drying temperature, press TEMP to scroll to the desired heat. To protect your wardrobe, not all temperatures are available with every cycle. High heat is recommended for sturdy fabrics. Medium High heat is recommended for most cotton fabrics. Medium heat is recommended for wrinkle free, permanent press and lightweight fabrics. Low heat is recommended for delicate fabrics. No Heat should only be used with a Timed Dry setting to dry items containing feathers, down, foam rubber, plastics or rubber-like materials; to freshen clothing, pillows or blankets; or to dust draperies. Note: Using No Heat in any Auto Dry cycle will result in long drying times and /or wet loads at the end of the cycle. Dryness Level To change the dryness level, press DRYNESS until the desired selection is made. Select Normal for most loads. Occasionally a load may seem too damp or overdried at the end of the cycle. To increase drying time for similar loads in the future, select More Dry. For loads requiring less drying time, select Less Dry. Select Damp Dry for items you wish to partially dry before hanging or ironing. Note: To prevent over-drying, not every dryness level is available with every cycle. Options To select an option, press OPTIONS until the indicator for the desired option flashes, then press SELECT. If an option is not available for a cycle, the indicator will not light. Follow the same steps to delete an option. The Cycle Signal will sound at the end of the cycle and periodically during Press Saver. Select Shrink Guard to lower the initial drying temperature to protect fabrics from overdrying. Select Press Saver if the dried load might not be removed promptly at the end of the cycle. The dry load will continue tumbling without heat for 30 minutes to help reduce wrinkling. When the Cycle Signal is selected, a beep will be heard periodically. The load may be removed any time during Press Saver. Dryer Features Control To avoid having someone accidentally start or stop the dryer, press OPTIONS and SELECT at the same time until the Control indicator is lighted. To remove the control lock, press OPTIONS and SELECT again. Status Lights The following indicators may be lighted during the cycle: • Drying • Cool Down • Press Saver • Clean Lint Filter • Control PN 134431300A (0501)