Frigidaire GLTF2940FS Operating Instructions

Frigidaire GLTF2940FS - 3.5 cu. Ft. Front Load Washer Manual

Frigidaire GLTF2940FS manual content summary:

  • Frigidaire GLTF2940FS | Operating Instructions - Page 1
    © Med © Low 0 © Warm/Warm © HangDry © HottCold 0 No Spin DelayStart 0 0 PressSaver 0 Extra Rinse 0 ExtraSpin 0 Heavy 0 CydeSignal 0 Normal 0 time © DoorLoek 0 Wash © Rinse © FinalSpin O Control_ / Before Operating Your Washer Read your washer Owner's Guide. It has important safety and warranty
  • Frigidaire GLTF2940FS | Operating Instructions - Page 2
    minutes of regular reversing tumble action are followed by 30 minutes of occasional tumbling as the toad soaks. The water will drain out and the load will spin slowly for a short time. Follow Soak with a complete wash cycle suitable for the load and a full detergent dose. Touch Up Use this cycle
  • Frigidaire GLTF2940FS | Operating Instructions - Page 3
    Delicate Handwash Silk Wool Sport Bulky Soak Touch Up Rinse Spin Drain Spin Estimated Cycle Duration ** 49minutes 44 minutes 31 minutes 32 minutes 30 minutes 28minutes 28minutes 28minutes 33minutes 42 minutes 42 minutes 30 minutes 19 minutes 13 minutes Temperatures _]_ Co,d/Cold v_
  • Frigidaire GLTF2940FS | Operating Instructions - Page 4
    IMPORTANTES contenues dans le guide d'utilisation du proprietaire 30, 60 ou 90 minute ou 2 a travers 12 heure. 8. Mettez la machine a laver en marche. ,, Fermez la porte et appuyez sur Demarrer (START). La machine DOOR LOCK) s'altumera. ,, Un article oublie peut 6tre ajoute dans la cuve de la machine
  • Frigidaire GLTF2940FS | Operating Instructions - Page 5
    des r6sultats optimaux, suivez le guide d'entretien du fabricant sur les Froid (Hot/Cold), essorage additionnei (Extra Spin) et Suspendre pour Secher (Hang Dry) par culbutage inverse suivies de 30 minutes de culbutage sporadique pendant charges mouillees, oubliees dans ta machine a laver. Versez la
  • Frigidaire GLTF2940FS | Operating Instructions - Page 6
    _tre montrer comme 30, 60 ou 90 minute ou 2 a travers 12 heure. (Verrouillage des commandes) (Control Lock) Pour eviter que la machine a laver soit de la porte (Door Lock) Ringage (Rinse) Lavage (Washing) Essorage final (Final Spin) _ (Verrouitlage des Commandes) (Control Lock) NIP 134848800
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

WASHER
OPERATING
iNSTRUCTiONS
©
High
O0
Cold/Cold
© Med
O0
WarmlCold
© Low
0
© Warm/Warm
© HangDry
©
HottCold
0 No Spin
DelayStart
0
PressSaver
0
time
0
Extra Rinse
0
ExtraSpin
0
Heavy
0
CydeSignal
0 Normal
0
©
DoorLoek
0
Wash
©
Rinse
©
FinalSpin
O
Control_
/
TEMP
SPIN
OPTIONS Select
SOIL
O
Auto
_8
J
Before
Operating
Your Washer
Read your washer
Owner's
Guide. It has
important
safety
and warranty
information.
It also
has
many suggestions
for best washing
results.
To reduce the risk of fire, electric shock or
injury
to
persons,
read
the
IMPORTANT
SAFETY
INSTRUCTIONS
in your washer
Owner's
Guide
before
operating
this
appliance.
Operating
Steps
Read
and follow
'Washing
Procedures"
in your
Owner's
Guide.
It provides
detailed
information
for preparing
the
wash
load
and choosing
control
settings
to ensure
best
washing
results.
1. Sort laundry
into
loads that can be washed
together.
2. Prepare
items for washing.
3. Pretreat stains
and heavy soil.
4. Add laundry
load to the wash drum.
5. Add laundry products
to the dispenser.
*
Detergent,
bleach and fabric softener
will be
dispensed
at the
proper time
in the cycle.
*
Slide safety latch to the right to open the dispenser
drawer.
*
Add the recommended
amount
of a high
efficiency
detergent
to the detergent
_._z_/
compartment.
6.
7.
If desired,
add liquid chlorine
bleach and liquid fabric
softener
to the
appropriate
compartments.
Slowly
close the dispenser
drawer.
Closing
the
drawer too quickly could
result in early dispensing
of bleach or fabric softener.
Any water
remaining
in the dispenser
at the end of
the cycle
is a result of siphoning
action and part of
normal
operation.
Select the appropriate
cycle and settings
for the load.
Turn the Cycle
Selector
knob to select the cycle.
The estimated
time
wilt be displayed.
Suitable
wash
and rinse
water temperatures,
final
spin speed,
options
and soil level for each cycle will
automatically
be displayed.
To change the settings,
press the TEMP, SPIN and
SOIL buttons.
To provide the best care for your
laundry,
not every temperature,
spin speed,
option
and soil level is available
with every cycle.
If a setting
is not available,
its indicator
will
not light.
To select
or delete
an option,
press OPTIONS,
then,
while
the indicator
is blinking,
press
Select.
The
indicator
will light when
the
option
has been
selected.
It will no longer be lighted when the option
has
been
deleted.
Adjustments
to the cycle
will
be remembered
each
time that cycle
is selected
in the future.
See the
Cycle
Selections
chart for factory
settings.
Select
Delay Start to delay the beginning
of the cycle
for up to 12 hours.
The delay time
selected
will
be
displayed
as 30, 60 or 90 minutes
or 2 through
12 hrs.
8.
START Pause
Cancel
Start the washer.
Close the door
and press
START.
The washer
will
not operate
with the door open.
The status
lights will
blink, the signal
wilt beep and "dr" will
be displayed
as a reminder
to close the door.
As a safety measure,
the door will automatically
lock during the entire
wash
cycle and the Door
Lock indicator
wilt be lighted.
•A
forgotten
item can be added to the wash drum.
Press
Pause/Cancel
once.
"PAU" will
be displayed
alternately
with
the estimated
cycle time.
Open the
door, add the item, close the door
and press START
to resume
the cycle.
If the
cycle is interrupted
during
spin, it will take
approximately
2-3 minutes
for the door
lock to
release.
DO NOT force open the door.
• To stop the washer,
press
Pause/Cancel
twice.
9. A signal
will sound
when
the Cycle
Signal option
is
selected.
Remove
items from
the washer
when
the
cycle
ends.
Cycle Selection
Turn the Cycle Selector knob to the desired cycle.
For best
results, follow the fabric
care label instructions
on items to
be washed.
To change
the
selection
after the
cycle
has
begun, press Pause/Cancel
twice.
Just turning
the knob
to another
selection
will not change the cycle.
The signal
will
beep
and the
status
lights
will flash
but the
original
cycle will
continue.
PN 134848800
(0703)