Frigidaire IM115 User Manual - Page 5

15. Reinstall freezer shelf in lower position. Set ice container (2) on shelf. 18. Push plastic water supply tubing into bottom of water valve as far as it will go. Finger tighten nylon compression nut onto threaded end of water valve. Tighten another one half turn with wrench. DO NOT over tighten. 16. Locate factory punched holes at bottom right corner of rear panel. Holes are only drilled through cabinet liner. Align water valve bracket with factory drilled holes. Use a power drill with a Phillips® head bit to drive the two self drilling screws (4) through bracket and into cabinet. 19. Secure plastic water tubing to rear of cabinet with two plastic clamps (9). NOTE: Clean back of cabinet with a commercial household cleaner, ammonia or alcohol before applying clamps. 17. Connect wiring harness to water valve. Make sure connection is tight. 20. On models with exterior condenser, reinstall condenser brackets and tighten down screws. 21. On refrigerators with dynamic condensers, remount sound baffle, if installed. See step 5. 5