Fujitsu 4099D Operating Guide - Page 75
TP_IF baud rate, Interface, VIDEO, <<SETUP MODE>>, Settings, Paper Length Check
UPC - 097564305894
View all Fujitsu 4099D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
4. Press or . The displayed option changes (SCSI, VIDEO, TP_IF ). 5. When the desired interface appears, press ENTER to save the change. The LCD returns to the menu screen (Interface). 6. To quit the , turn off the power. Interface VIDEO Interface TP_IF baud rate This function sets the baud rate (signaling speed) according to the baud rate of the third party interface (TP_IF). At least, set the speed slower than that of the host interface. NOTE You cannot use this function when the setup mode is brought by pressing MENU in the Ready status. LCD display TP_IF Baud Rate Options 2400, 4800, 9600, 19200 (Default: 9600) Remarks Unit: baud The following is an example of operation when you use this function. 1. In initial screen, press ENTER . The menu screen (Settings or Paper Length Check) appears. NOTE The "Settings" screen does not appear and the "Paper Length Check" screen first appears when your scanner is not controlled through the video or TP interface. Settings Paper Length Check 6-30