Fujitsu 4099D Operating Guide - Page 82
Pick start time, <<SETUP MODE>>, Settings, Paper Length Check
UPC - 097564305894
View all Fujitsu 4099D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Pick start time This function sets the period from when paper is manually put on the hopper to when the pick operation starts. LCD display Pick start time Options 00.2 S to 29.8 S (Default: 01.0 S) Remarks In units of 0.2 second The following is an example of operation when you use this function. 1. In initial screen, press ENTER . The menu screen (Settings or Paper Length Check) appears. NOTE The "Settings" screen does not appear and the "Paper Length Check" screen first appears when your scanner is not controlled through the video or TP interface. 2. Press repeatedly until "Pick start time" appears in the lower line of the menu screen. 3. Press ENTER . The option select screen appears with the current setting 01.0S blinking (blinking indicates "changeable"). 4. Press or . The displayed option changes (00.2S to 29.8S). The value changes in 0.2 seconds. 5. When the desired value appears, press ENTER to save the change. The LCD returns to the menu screen (Pick start time). Settings Paper Length Check Pick start time Pick start time 01.0 S Pick start time 05.0 S Pick start time 6-37