Fujitsu A3110 A3110 BIOS Guide - Page 23

Info Menu Hard Disk Security Submenu of the Security Menu The Hard Disk Security submenu is for configuring hard disk security features. BIOS Setup Utility Main Advanced Security Boot Info Exit Hard Disk Security Drive0 Password Is: Clear Set Drive0 Password Password Entry on Boot: [Enter] [Enabled] F1: Help Esc: Exit v02.v5v9 (C)Copyright 1985-2006, American Megatrends, Inc. Figure 13. Hard Disk Security Submenu Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu Menu Field Options Default Description Drive0 Password Is: ___ Clear Display-only. Default is Clear. When the Drive0 Password has been set, the field changes to Set. When this password is set, the primary hard disk drive cannot be used in another system unless the password is entered. Set Drive0 ___ [Enter] Sets, changes or cancels the Drive0 Master Password. The Drive0 Password Master Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. When a Drive0 Master Password is set, it must be used to access the hard drive if it is used in another system. Note that the password will not take effect until the system has been rebooted. Password Entry on Boot: ■ Disabled ■ Enabled [Enabled] When set to disabled, entry of a Hard Disk Password is not required before OS boot. (The hard disk is still password-protected without password entry.) 23