Fujitsu CG01000-464802 User Manual - Page 13

2.7 Connecting the Cable i). Turning the Power Off Depress the side marked "O" to turn the power off. Connect the power cable and SCSI signal cable as shown in Figure 2-8. ii). Turning the Power On Depress the side marked "I" to turn the power on. The POWER LED will light. If not, please check the power source. iii). SCSI Termination The Fujitsu Scanpartner 15C comes complete with a built in SCSI terminator. If the Scanner is the last device in a SCSI chain the terminator should be switched on. If the Scanner is not the last device the terminator should be off. The terminator on/off switch is located on the back of the Scanner, to the left of the SCSI cable connectors. Host PC Term. Host PC Term. Scanner SCSI Device Term. (Terminator Off) Scanner (Terminator On) 2-9