Fujitsu M4097D Operator's Guide - Page 59
Basic Product Specification - ipc
![]() |
UPC - 097564302930
View all Fujitsu M4097D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Basic Product Specification No. Item 1 Operating method 2 Image sensor 3 Light source 4 Document Size Minimum Maximum 5 Document Thickness 6 Optical Resolution 7 Output Resolution5 Binary Grayscale 8 Grayscale level (internal) 9 Scanning Simplex Speed (Engine Speed) Note *2 Duplex 10 Halftone patterns 11 Capacity of ADF 12 Compression 13 Interface Note *5 Specification ADF (Duplex), Flatbed CCD x2 Inert Gas (Xenon) Lamp x2 A8 (Portrait) A3/Double Letter 52 g/m2 (14lb) to 127 g/m2 (34lb) 400 dpi Remarks Front/Back Green Note *1 100/150/200/240/300/400/600 dpi 100/150/200/240/300/400 dpi 100/150/200 dpi 1024 levels (10bit) 50ppm, 200dpi, A4, Portrait 35ppm, 300dpi, A4, Portrait 45ppm, 300dpi, A4, Landscape 90ipm, 200dpi, A4, Portrait 60ipm, 300dpi, A4, Portrait 80ipm, 300dpi, A4, Landscape Dither/ Error diffusion 100 sheets (A4, 64 g/m2(17lb)) MH/MR/MMR SCSI-2 Third Party Slot Simplex Duplex Note *3 Note *4 High Density 50-pin, Female Note *6 11 Note *1: The details are described in chapter 4. *2: The actual scanning speed might differ due to host computers' environment. *3: The maximum number will differ due to the paper thickness. Refer to chapter 4. *4: The scanning speed might be slow. The usage with NO COMPRESSION is recommended. *5: Both SCSI-2 and the Third Party Slot can not be used at the same time. *6: The Power consumption of the boards should be as follows: - In the Low Power Mode: Less than 0.35 A - With IPC-4D option: Less than 1.5 A - Without IPC-4D option: Less than 3.0 A 5-1
![](/manual_guide/products/fujitsu-m4097d-operators-guide-9fff04a/59.png)