Fujitsu T5010 T5010 Getting Started Guide for Configuration A2Q - Page 3

Initial Start Up Lid Rotating Display Top Latch Display Side Bottom Latch DC Power Jack AC Adapter Modem Jack (Available on select models) LAN Jack Power/Suspend/ Resume Switch WLAN/Bluetooth/ WWAN Switch 1. Open the Display Panel • Ensure that your LifeBook is on a hard level surface and that the air vents are not blocked. • Lift the display, being careful not to touch the screen. • Adjust the display until it is at a comfortable viewing angle. To avoid possible damage to your computer, be sure the display panel is perpendicular to the keyboard Caution before rotating it. 2. Convert from Notebook to Tablet • Open your notebook and lift the display so it is perpendicular to the keyboard. • Rotate the display 180 degrees (either direction). • Carefully fold the display down onto the keyboard. • Push the latch down toward the display. • Reverse this procedure to return to the notebook configuration. Be sure to rotate the display in the opposite direction. 3. Connect AC Power • Plug the power cord into the AC adapter. • Plug the AC adapter into your notebook. • Connect the power cord to an electrical outlet. 4. Connect to Internet or Network • Move the wireless switch to "On" to turn on the wireless device. • Connect the phone cord (not supplied) to the modem jack (available on some models) or an Ethernet cable (not supplied) to the LAN jack on your Tablet PC and to a wall jack or to Ethernet router. 5. Turn on Power • Slide the Power/Suspend/Resume switch. • The notebook is now on and the battery is being charged. • The notebook will begin a power-on self test. Once successfully completed, the operating system will begin the initialization process. The Lithium ion battery is not charged upon purchase. Initially you will need to connect either the AC adapter or the Auto/Airline adapter to use your notebook. 6. Register For Genuine Windows Vista®: • Accept the Microsoft® Windows® Licensing Agreement and the Fujitsu End User License Agreement to proceed. Select your User ID and Password during the "Welcome Screen." Keep a record of your User ID and password stored in a secure place. THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES. Do not attempt to turn power on or off during this stage. • Register your LifeBook with Fujitsu Service and Support via our website (us.fujitsu.com/computers). This helps us to better serve you. For Microsoft ® Windows® 7 • After the operating system has initialized, the Windows Welcome screen will appear. Accept the Microsoft® Windows® Licensing Agreement and the Fujitsu End User License Agreement to proceed. Follow the on-screen directions as prompted. Accepting the automatic update feature is recommended. • If connected, you will be able to automatically access the Internet. If you are not connected and plan to register at a later time, click the Skip button. • O nce connected to the Internet, select Yes to continue registration, complete requested information, and click Next to complete registration. • Register your notebook with Fujitsu by going to our website at: us.fujitsu.com/computers. Ensure you are connected to the Internet. For Genuine Microsoft® Windows® XP Tablet PC: • A fter the operating system has initialized, accept the Microsoft® Windows® Licensing Agreement and the Fujitsu End User License Agreement to proceed. Then enter the information as prompted to personalize your notebook and configure your modem to dial. 7. Activate Additional Utilities & Drivers The Pen and touch functions will not be calibrated until ClickMe! is activated. Ensure that the AC adapter is connected and supplying power to your notebook before activating ClickMe! (For Additional Utilities) It will take 25 to 30 minutes for ClickMe! to install and configure your drivers and utilities. • Check to be sure the WLAN switch is on. "Click Me!" 3