Fujitsu fi-5530C Operation Manual - Page 47
Scanning thin Documents, Paper Thickness Switch
UPC - 097564306778
View all Fujitsu fi-5530C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
SCANNING VARIOUS TYPES OF DOCUMENTS 2.3 Scanning thin Documents 2.3 Scanning thin Documents When you scan a batch of thin documents (which are out of specification with under 52g/m² of thickness), document jams (Multi feed) and mis-pickings may occur. If such documents need to be scanned, switch the lever to "Thin" side. 1. Confirm that the thin documents fulfill the requirements of "6.2 Document Quality" on page 103. 2. Shift the position of the paper thickness switch to the "Thin" position (the factory 2 default is "Normal" position). Paper Thickness Switch"Normal" "Thin" 3. Scan the documents by refering "1.3 Scanning Documents" (page 10). fi-5530C Image Scanner Operator's Guide 31
2.3 Scanning thin Documents
fi-5530C Image Scanner Operator’s Guide
31
SCANNING VARIOUS TYPES OF DOCUMENTS
2
2.3
Scanning thin Documents
When you scan a batch of thin documents (which are out of specification with under 52g/m
²
of
thickness), document jams (Multi feed) and mis-pickings may occur. If such documents need to be
scanned, switch the lever to "Thin" side.
1.
Confirm that the thin documents fulfill the requirements of "6.2 Document Quality" on
page 103.
2.
Shift the position of the paper thickness switch to the "Thin" position (the factory
default is "Normal" position).
3.
Scan the documents by refering "1.3 Scanning Documents" (page 10).
Paper Thickness Switch
"Thin"
"Normal"