Fujitsu fi-5530C Operation Manual - Page 74
Clean the Plastic rollers lightly, not to roughen the roller surfaces. Take particular care
UPC - 097564306778
View all Fujitsu fi-5530C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
• Feed and Eject rollers 1) Open the ADF when the indication of the Function Number display is not "P" or "0". If you open the ADF when the indication of the Function Number display is "P" or "0", the Feed rollers / Eject rollers will not rotate even you perform the operation of step 2) below. 2) Simultaneously hold down the "Send to" and "Scan" buttons on the operator panel. The Feed rollers / Eject rollers start to rotate slowly. 3) Hold a soft, dry cloth moistened with cleaning fluid against the surface of the rotating Feed rollers / Eject rollers so that it lightly cleans the surface of the rollers. As a guideline, 7 presses of the "Send to" and "Scan" buttons make the Feed rollers /Eject rollers to rotate one full turn. CAUTION Function No. display Function Send to Scan Power button LED In step 2), the Feed rollers turn at the same time while rotating the Eject rollers. When cleaning the Eject rollers, be careful not to touch the Feed rollers and vice versa. • Plastic rollers Clean the Plastic rollers lightly, not to roughen the roller surfaces. Take particular care in cleaning these rollers as black debris on them adeversely affects the pickup performance. Be careful not to damage the sponges beside the rollers. • Sheet guides Clean lightly. • Glass Clean lightly. ATTENTION If the glass is dirty, vertical black streaks may apper in the scanned images. • Ultra sonic sensor Clean lightly with a dry cloth. 58