Fujitsu fi-5530C Operator's Guide - Page 109
Plastic rollers, As a guideline, seven presses of the [Send to] and [Scan] buttons make the Feed - cleaning
UPC - 097564306778
View all Fujitsu fi-5530C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
3.2 Cleaning the ADF • Feed and Eject rollers 1) Open the ADF when "P" or "0" is not indicated on the Function Number display. If you open the ADF when "P" or "0" is indicated on the Function Number display, the Feed/Eject rollers will not rotate even if you perform step 2) below. 2) Simultaneously hold down the [Send to] and [Scan] buttons on the operator panel. The Feed/Eject rollers start rotating slowly. 3) Put a soft cloth moistened with cleaning fluid to the surface of the rotating Feed/ Eject rollers lightly so that the surface of the rollers is cleaned. As a guideline, seven presses of the [Send to] and [Scan] buttons make the Feed/ Eject rollers to rotate one full turn. CAUTION Function No. display 3 Function DAILY CARE Send to Scan Power button LED In step 2), the Feed rollers turn at the same time while rotating the Eject rollers. When cleaning the Eject rollers, be careful not to touch the Feed rollers and vice versa. • Plastic rollers Clean the Plastic rollers lightly, preventing scratches on the roller surfaces. Take particular care in cleaning these rollers as black debris on them adversely affects the pickup performance. Be careful not to damage the sponges beside the rollers. • Sheet guides Wipe clean lightly. • Glass Wipe clean lightly. ATTENTION If the glass gets dirty, vertical black streaks may appear in the scanned images. • Ultra sonic sensor Wipe clean lightly with a dry cloth. fi-5530C2 Image Scanner Operator's Guide 93