Fujitsu fi-5530C Operator's Guide - Page 94
Select [Auto Color Detection] under [Output mode].
UPC - 097564306778
View all Fujitsu fi-5530C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
⇒ The [Multi Image] dialog box appears. 3. Select [Auto Color Detection] under [Output mode]. 4. Under [Select Current Image Setting], select a side, and then configure settings for each side in the [TWAIN Driver] dialog box. ATTENTION When scanning in duplex mode, the same [Image Mode] must be selected for both the front and back sides. 5. In the [TWAIN Driver] dialog box, click the [OK] button. ⇒ Changes made are saved and the [TWAIN Driver] dialog box closes. Continue scanning in ScandAll PRO. For information about how to scan documents, refer to section "1.5 How to Use ScandAll PRO" on page 29. 78
78
⇒
The [Multi Image] dialog box appears.
3.
Select [Auto Color Detection] under [Output mode].
4.
Under [Select Current Image Setting], select a side, and then configure settings for
each side in the [TWAIN Driver] dialog box.
5.
In the [TWAIN Driver] dialog box, click the [OK] button.
⇒
Changes made are saved and the [TWAIN Driver] dialog box closes.
Continue scanning in ScandAll PRO.
For information about how to scan documents, refer to section
"1.5 How to Use ScandAll
PRO" on page 29
.
ATTENTION
When scanning in duplex mode, the same [Image Mode] must be selected
for both the front and back sides.