Garmin DriveSmart 65 with Amazon Alexa Owners Manual - Page 7
Turning the Device On or Off, Acquiring GPS Signals, Status Bar Icons, Using the On-Screen Buttons, - setup
View all Garmin DriveSmart 65 with Amazon Alexa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Connecting to the Stereo Using an Auxiliary Audio Cable If your Garmin DriveSmart device is not connected to the vehicle stereo using a Bluetooth connection, you can send the device audio to the vehicle stereo using a 3.5 mm stereo auxiliary audio cable. 1 Connect one end of the audio cable to the 3.5 mm audio output jack on the Garmin DriveSmart power cable plug. TIP: The electrical system in some vehicles may generate background noise in the device audio, such buzzing or squealing, when you connect to the stereo using an auxiliary audio cable. If this occurs in your vehicle, you can connect a ground loop isolator (sold separately) between the audio cable and the audio output jack on the power plug. This can help eliminate the electrical background noise. 2 Connect the other end of the audio cable to the auxiliary input jack for your vehicle stereo. This jack may be labeled AUX or Line In. See your vehicle owner's manual for more information. 3 Set the audio source for your vehicle stereo to the auxiliary input. 4 Select an option: • During the initial Garmin Drive app pairing process, select No when the app asks whether you currently use Bluetooth technology to connect your smartphone to your vehicle. • After the initial pairing process, from your Garmin DriveSmart device, select Volume > Bluetooth Audio Setup, and verify Garmin Device is selected for each audio type. Turning the Device On or Off • To turn the device on, press the power key , or connect the device to power. TIP: You can charge your device faster by putting it in power saving mode while charging the battery. • To turn off the device completely, hold the power key until a prompt appears on the screen, and select Off. The prompt appears after five seconds. If you release the power key before the prompt appears, the device enters power saving mode. Acquiring GPS Signals When you turn on your navigation device, the GPS receiver must collect satellite data and establish the current location. The time required to acquire satellite signals varies based on several factors, including how far you are from the location where you last used your navigation device, whether you have a clear view of the sky, and how long it has been since you last used your navigation device. The first time you turn on your navigation device, it may take several minutes to acquire satellite signals. 1 Turn on the device. 2 Wait while the device locates satellites. 3 If necessary, go to an open area, away from tall buildings and trees. in the status bar indicates the satellite signal strength. When at least half the bars are filled, the device is ready for navigation. Status Bar Icons The status bar is located at the top of the main menu. The status bar icons display information about features on the device. You can select some icons to change settings or view additional information. GPS signal status. Hold to view GPS accuracy and acquired satellite information (Viewing GPS Signal Status, page 23). Bluetooth technology status. Select to view the Bluetooth settings (Wireless Network Settings, page 19). Wi-fi signal strength. Select to change the wi-fi settings (Wireless Network Settings, page 19). Connected to hands-free calling. Select to place a phone call (Hands-Free Calling, page 16). Current time. Select to set the time (Setting the Time, page 19). Battery charge level. Garmin Drive app connection status (Pairing with Your Smartphone, page 2). Temperature. Select to view the weather forecast (Viewing the Weather Forecast, page 17). Using the On-Screen Buttons On-screen buttons allow you to navigate the pages, menus, and menu options on your device. • Select to return to the previous menu screen. • Hold to quickly return to the main menu. • Select or to scroll through lists or menus. • Hold or to scroll faster. • Select to see a context-based menu of options for the current screen. • To put the device in power saving mode, press the power key while the device is on. While in power saving mode, the screen is off and the device uses very little power, but it can wake instantly for use. Adjusting the Volume 1 Select Volume. 2 Select an option: • If your device is not connected to a smartphone, use the Master Volume slider to adjust the device volume. • If your device is connected to a smartphone, use the two sliders to adjust the volume for different types of audio. Getting Started 3