Garmin GC 14 Installation Instructions - Page 4
Specifications
![]() |
View all Garmin GC 14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Image on the Chartplotter Screen Flickers • Verify the camera points away from the sun. • Adjust the contrast on your chartplotter. See your chartplotter manual for instructions. Camera is Not Working and the Surface is Hot • Verify the camera is connected to an appropriate power source. Video Image Includes Scrolling Bars on the Chartplotter Screen • Verify all cables are firmly connected. • Install a composite video ground loop isolator (not included) between the camera and any chartplotter that does not have an isolated power ground. Specifications Dimensions (W x H) 54.3 x 50.7 mm (2.15 x 2.0 in.) Weight 190 g (6.7 oz) Operating temperature From -20 to 60°C (from -4 to 140°F) Storage temperature Water rating From -20 to 60°C (from -4 to 140°F) IEC 60529 IPX71 Input voltage From 9 to 18 Vdc Current draw IR off: 90 mA @ 12 Vdc IR on: 183 mA @ 12 Vdc Compass-safe distance 254 mm (10.0 in.) Viewing angle Vertical : 52 degrees Horizontal : 95 degrees IR distance 15 m (49 ft.) Video output 1.0Vp-p composite 75 Ω composite Resolution PAL Effective pixels Vertical: 582 Horizontal: 976 © 2021 Garmin Ltd. or its subsidiaries Garmin®, the Garmin logo, and GPSMAP® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. GC™ is a trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. Axis® is a registered trademark of Axis AB. M/N: B0P0776 1 The device withstands incidental exposure to water of up to 1 m for up to 30 min. For more information, go to www.garmin.com/waterrating. © 2021 Garmin Ltd. or its subsidiaries support.garmin.com
![](/manual_guide/products/garmin-gc-14-installation-instructions-1323203/4.png)