Garmin GDL 39 User's Guide - Page 19
Installation, 3.1 Connecting the GDL 39 to a Garmin Unit
View all Garmin GDL 39 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3 Installation The GDL 39 may be connected to the compatible display device by either a wireless Bluetooth connection or directly through a serial cable. The GDL 39 supports connections to multiple Bluetooth devices. The GDL 39 is intended to be physically wired to only one display device. NOTE: Exposed contacts on the top of the battery do not have power when not connected to a unit and no covering is needed. Be careful of causing mechanical damage to the pins. If the pins are bent, the unit or battery may not function properly. 3.1 Connecting the GDL 39 to a Garmin Unit 1. Connect the GDL 39 cable to the Garmin display unit (unless using a Bluetooth connection). 2. Connect the cable power lead to a 10-32 VDC power source. If the optional battery pack is used, connecting the power lead is not required. 3. Connect the GDL 39 cable to the data port on the GDL 39. 190-11110-00 Rev. C Garmin GDL 39 Portable ADS-B and GPS Receiver User's Guide 3-1