Garmin GMR 404/406 Radar Pedestal GMR 404/406 Owner's Manual - Page 9
Radar Configuring the Radar ADJ/MENU, System, Radar
View all Garmin GMR 404/406 Radar Pedestal manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Radar Page A properly installed radar is detected as a new network connection when you turn on your Garmin Marine Network chartplotter. Note: A software update may be needed for the radar to function properly. If the message "Incompatible Software Version" appears when you turn on your chartplotter, you must update your chartplotter software. A software update card is provided with the GMR 404/406. When the new radar is detected, the Radar Page is added to the page sequence. If the Radar Page is not available, press and hold ADJ/MENU to open the Main Menu. Highlight the System tab, and select Radar from the Services list at the bottom of the page. To view the Radar Page: Press PAGE repeatedly until the Radar Page appears. Basic Operation > Radar Page Configuring the Radar Page You can customize the appearance of the Radar Page. note: For detailed information about configuring Digital 1 and Digital 2 data fields, see your chartplotter owner's manual. To add or remove functions on the Radar Page: 1. Open the Radar Page, and then press and hold the DATA/CNFG key to open the Configuration window. Radar Page 2. Using the ROCKER, highlight the function you want to add or remove, and press ENTER. Only functions with a check mark in the check box next to them appear on the Radar Page. GMR 404/406 Owner's Manual