Garmin GPSMAP 2206 GPSMAP 2206/2210 Installation Instructions - Page 9
CANet Wiring for the GPSMAP 2206/2210, To install the 3-Wire Connector - manual
UPC - 753759053024
View all Garmin GPSMAP 2206 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
INSTALLATION INSTRUCTIONS CANet Wiring for the GPSMAP 2206/2210 CANet® is a high-speed sonar network. Using the CANet interface optimizes the performance of the CANet-compatible units. CANet compatible unit device features, such as Ultrascroll™, are affected if a serial interface is used. To install the 3-Wire Connector: 1. Insert up to three wires into the 3-wire connector. Do not strip the wire insulation. Refer to the following CANet Terminator Connection diagram. 2. Use a standard pair of pliers to fully depress the red button into the connector. 3. Wipe the excess water repellent gel from the connector. The following diagram shows CANet wiring for the GPSMAP 2206/2210. CANet TERMINATOR CANet TERMINATOR GREEN WHITE BLACK RED ORANGE BLACK RED GREEN WHITE BLACK DRAIN* ORANGE 3A FUSE � � BATTERY 10-33 VDC CANet EXTENSION CABLE 1 GREEN WHITE ORANGE BLACK DRAIN* FUSE** GREEN WHITE ORANGE BLACK RED CANet Wiring Diagram Notes: * Connect the drain wire only on one side. ** Fuse size varies based on the unit. See the unit's owner's manual for specific fuse information. CANet COMPATIBLE DEVICE GPSMAP 2206/2210 & GPS 17 7