Garmin GPSMAP 3210 Owner's Manual - Page 11

Getting Started Using the Optional Marine Remote Control Use the keypad on the optional Marine Remote Control to operate your GPSMAP 3206/3210 from a distance. Contact your Garmin dealer or Garmin Product Support to purchase the Marine Remote Control. To operate the remote control, point the IR (infrared) window on the remote toward the unobstructed IR window on the lower-right corner of the GPSMAP 3206/3210. All keys on the remote control operate in the same manner as the keypad on the GPSMAP 3206/3210. Each key's primary function appears on the key. To activate the secondary functions for the ADJ/MENU, NAV/MOB, DATA/CNFG, and Thumb Stick (ENTER/MARK) keys, press and hold the key. The Thumb Stick combines the operations of the ROCKER and ENTER/MARK key. Use it to select menu options, change settings, enter data, and confirm entry. You can also control movement of the pointer on the Map Page. Press ENTER on the Thumb Stick to select a highlighted item or begin data entry. Press and hold the Thumb Stick to mark a waypoint. Installing the Remote Control Batteries The remote requires two AAA alkaline batteries. To install the batteries, press down on the battery door clip, and then pull the battery door away from the remote. Install the batteries observing the correct polarity (see the inside of the battery compartment). Replace the cover, and make sure it is closed all the way. NOTE: The remote is for use in shaded or enclosed environments. Direct sunlight interferes with infrared operation. The Marine Remote Control is NOT waterproof. Getting Started > Using the GPSMAP 3206/3210 Keypad IR window Thumb Stick ZROANOGME QUIT PAGE ADJ MENU ENTER NAV MOB DATA CNFG FCTN 1 ABC 2 DEF 3 GHI JKL MNO 4 5 6 PQRS 7 TUV 8 WXYZ 9 +0 Marine Remote Control GPSMAP 3206/3210 Owner's Manual