Garmin GPSMAP 496 Owner's Manual (for Europe) - Page 107
Alarms Tab, Airspace Alarms Sub Tab Aviation Mode Only
![]() |
View all Garmin GPSMAP 496 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Alarms Tab The Alarms tab allows you to define alarm settings. To set an alarm: 1. Press Menu twice to open the Main Menu. 2. Use the ROCKER to select the Alarms tab. 3. Highlight the field below the alarm name you want activate, and press Enter. 4. Change the mode to On, and press Enter. If necessary, highlight the next field to the right, and press Enter, enter the settings, and press Enter. When an alarm goes off, the alarm message appears on the screen and the unit emits five (5) beeps. When you select an alarm to be persistent, the alarm message appears on the screen and the unit beeps until you press Enter to acknowledge the alarm. Press Nrst/FIND to view the Airspace Information when an airspace alarm message appears. Main Menu > Alarms Tab To set a persistent alarm: 1. Press Menu twice to open the Main Menu. 2. Use the ROCKER to select the Alarms tab. 3. Highlight the box next to the alarm you would like to make persistent (for example, Next Turn). 4. Press Enter to place a check mark in the Persist box. When an alarm goes off, it sounds until you acknowledge the alarm message by pressing Enter. Airspace Alarms Sub Tab (Aviation Mode Only) Class A ,TMA; Class E, CTA; ATZ, Control Zone; Restricted, ADIZ; MOA, MATZ; Mode C Veils; Other SUAs; Altitude Buffer-enables and disables the alarms. Select On to enable or Off to disable. Altitude Buffer-sets the buffer for the altitude alarm. Highlight the Altitude Buffer field, and press Enter to select a different value. Use the ROCKER to select the digits. GPSMAP 496 Owner's Manual 99
![](/manual_guide/products/garmin-0100057801-owners-manual-europe-59e7e17/107.png)