Garmin GPSMAP 7410 Camera Integration Guide - Page 1

Camera Integration Guide Installation Instructions Marine Camera Integration Guide Integrating FLIR® and Axis® network cameras with your Garmin® marine electronics provides superior video surveillance for your boat. You can view video on every chartplotter screen on your boat, or view multiple video streams on one chartplotter combination screen. You can use touchscreen gestures to control your camera from your chartplotter, such as pinching to zoom, and dragging to pan and tilt the camera. You can customize your chartplotter to store settings with on-screen presets for each camera, such as camera position and zoom data. A Garmin Power over Ethernet (PoE) Isolation Coupler (GPN 010-10580-10) must be used to connect standard Ethernet equipment to a Garmin Marine Network. Such equipment includes a network camera, network switch, video encoder, or Multiple Network Camera Connection PoE injector. A shielded cable, such as a CAT 5e F/FTP, offers the best protection for your equipment. Connecting a PoE device directly to a Garmin Marine Network chartplotter damages the Garmin chartplotter and may damage the PoE device. You can connect multiple supported video cameras and up to two video encoders (models with four channels or fewer) to the Garmin Marine Network. You can set up combination screens to view multiple videos at once. In devices with multiple composite video inputs, only a single video function within a combination screen can use a built-in video input. Some chartplotters, including the GPSMAP® 8015 series and 8500 series, support quad view, which allows four built-in videos to be viewed within a single video function. NOTE: When you connect multiple video cameras to the Garmin Marine Network, you can insert a PoE isolation coupler in the path to create a single connection from a network switch to your Garmin electronics. FLIR Cameras FLIR marine cameras provide thermal imagery, and can provide an optional lowlight camera output. When you connect a FLIR camera to your compatible chartplotter, the network detects the camera automatically and displays it in the source list. You do not need to pre-configure the camera before installation. Garmin GPSMAP 7400, 7600, and 8000 series chartplotters are compatible with FLIR M and MD series cameras. Item April 2015 Description Compatible GPSMAP chartplotter Garmin Marine Network cable DC power FLIR M-series camera Analog/composite video camera such as Garmin GC10 (010-11372-00) Axis network camera FLIR joystick Ethernet cable Composite video cable Axis video encoder BNC composite inputs PoE network cable Printed in Taiwan 190-01916-00_0A