Garmin GPSMAP 7410 Camera Integration Guide - Page 2

Item Description Multi-port PoE switch* Garmin PoE isolation coupler (GPN 010-10580-10)** Compatible GPSMAP chartplotter *The blue ports on the multi-port PoE switch are non-powered ports. The red ports are powered ports. **You should use a Garmin Marine Network waterproof connection on at least one side of the PoE isolation coupler. You can use a waterproof connection on both sides by crimping a new RJ-45 connector on one of the Garmin cables to connect to standard Ethernet equipment. For networks without a Garmin Marine Network waterproof connection, point the PoE isolation coupler down, or horizontal with a drip loop to avoid water retention around the connector. FLIR M-Series Camera to Network Connection Item Description Item Description FLIR M-Series network camera À DC power Á Ethernet cable  PoE isolation coupler (GPN 010-10580-10) à GPSMAP chartplotter Ä Single or dual composite video (V/IR) F-type female to coaxial to Å BNC adapter cable FLIR M-series camera À DC power Á PoE isolation coupler (GPN 010-10580-10)  GMS 10 network port expander à GPSMAP chartplotter Ä FLIR midspan PoE injector (or equivalent) Å FLIR joystick Æ Single (V/IR) composite (BNC) video cable* Ç *See Dual Payload FLIR Models for recommended video connections from the camera to the chartplotters, with and without an Axis video encoder. FLIR Camera Settings Using the chartplotter, you can change the polarity, color scheme, and scene setting (gain control) displayed on your FLIR camera. You can switch between a thermal and visible camera view on your chartplotter screen. FLIR MD-Series Camera to Network Connection NOTE: You must have a dual-payload M-series FLIR camera connected to your chartplotter network to switch between views. FLIR MD-series cameras provide thermal views only. From the video screen, select Menu. Change Colors: Sets the color scheme of the infrared image. Change Scene: Sets the camera to a night, night docking, day, or man overboard view. Polarity: Sets the colors or shades that represent hot and cold in the infrared image. Item Description FLIR MD-Series network camera À FLIR midspan PoE injector (or equivalent) Á PoE isolation coupler (GPN 010-10580-10)  GPSMAP chartplotter à Single or dual composite video (V/IR) F-type female to coaxial to Ä BNC adapter cable FLIR Camera to GMS™ 10 Network Port Expander Connection Associating a FLIR Camera with a Video Input Device Associating a detected FLIR camera and a video input device creates a connection between the camera and the device. The video input device can be a built-in connection on a chartplotter or an Axis video encoder. You must create an association between a FLIR camera and a chartplotter. A prompt appears the first time you select a FLIR camera as the video source. When >> appears next to the device name, you are prompted to form an association. From the Video Source menu, select your device. >> disappears from the device name. Changing the Associated Video Input Device for a FLIR Camera You can change the video association between the FLIR camera and its video input device after the initial association. 1 From the video screen, select your connected FLIR camera. 2 From the video screen, select Menu > Video Setup > Source. 3 Select the source of the video feed. Dual Payload FLIR Models Some FLIR camera models output multiple video streams. On these dual payload models, composite video cables are marked V/IR and IR-only from the camera. The video stream from the V/IR cable can be switched between daylight video and infrared 2