Garmin GRC 10 Remote Control GRC 10 User’s Guide - Page 3

Introduction, System Info, Caring for the GRC 10 - grc x 10 remote control

Get Garmin GRC 10 Remote Control PDF manuals and user guides View all Garmin GRC 10 Remote Control manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

NOTE: Operators may use STC SA01487SE qualification of the GRC/GRT 10 as a basis for showing compliance with 14 CFR Part 91.21. NOTE: This device has been approved for use in the USA and Canada only. NOTE: The USB port is for factory use only. Introduction The GRC 10 is a remote control for the XM radio function of the GDL 69A. The GRC 10 uses a radio link and does not need to be pointed at the receiver. The GRC 10 range is approximately 10 m (30 feet) and should work anywhere in the cabin. System Info System information about the GRC 10 is available from the Menu page. Information includes: GRC 10 Software Versions, GRT 10 Software Versions, and the RF Pairing ID. The GRC 10 serial number is located under the batteries. To view System Info 1. Press the MENU key. 2. Press the p or q key to highlight the System info menu selection. 3. Press the u key to show the System info. 4. Press MENU, XM, or one of the arrow keys to return to the Menu. Caring for the GRC 10 The GRC 10 is constructed of high quality materials and does not require user maintenance other than cleaning. Clean the unit using a cloth dampened with mild detergent solution and then wipe dry. Avoid chemical cleaners and solvents that may damage plastic components. 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
3
NOTE:
Operators may use STC SA0±487SE qualification
of the GRC/GRT ±0 as a basis for showing compliance
with ±4 CFR Part 9±.2±.
NOTE:
This device has been approved for use in the USA
and Canada only.
NOTE:
The USB port is for factory use only.
Introduction
The GRC ±0 is a remote control for the XM radio function of the
GDL 69A. The GRC ±0 uses a radio link and does not need to be
pointed at the receiver. The GRC ±0 range is approximately ±0 m
(30 feet) and should work anywhere in the cabin.
System Info
System information about the GRC ±0 is available from the Menu
page. Information includes: GRC ±0 Software Versions, GRT ±0
Software Versions, and the RF Pairing ID. The GRC ±0 serial number is
located under the batteries.
To view System Info
±. Press the
MENU
key.
2. Press the
p
or
q
key to highlight the System info menu
selection.
3.
Press the
u
key to show the System info.
4. Press
MENU
,
XM
, or one of the arrow keys to return to the
Menu.
Caring for the GRC 10
The GRC ±0 is constructed of high quality materials and does not
require user maintenance other than cleaning. Clean the unit using
a cloth dampened with mild detergent solution and then wipe dry.
Avoid chemical cleaners and solvents that may damage plastic
components.