Garmin GTR 225 GTR 255/255A/255B Pilot’s Guide - Page 28

Aux Audio

Page 28 highlights

3.3.2 Aux Audio The Aux function allows you to turn Aux Audio On/Off and set the volume value. 1. Press FUNC to access the Functions. Turn the LARGE knob to select the ICS Function. Turn the SMALL knob to view the Aux Volume function. Then, press the ENT key. Figure 3-17 Select the Aux Audio Function 2. Turn the SMALL knob to turn the Aux Audio On or Off. 3. Turn the LARGE knob to select the Aux Volume. Turn the SMALL knob to set the value. Then, press the ENT key. Turn Small Knob To Turn Aux On/Off Press the ENT Key to Save Press the CLR Key To Revert the Displayed Value to the Previous Value Turn LARGE And Then SMALL Knob To Adjust Aux Volume Figure 3-18 Adjust the Aux Audio 4. Press the CLR key to revert to the previous Volume value and then repeat step 3 to select a new value. 3-10 Garmin GTR 225/225A/225B Pilot's Guide 190-01182-00 Rev. A

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

3-10
Garmin GTR 225/225A/225B Pilot’s Guide
190-01182-00
Rev. A
3.3.2
Aux Audio
The Aux function allows you to turn Aux Audio On/Off and set the volume
value.
1. Press
FUNC
to access the Functions. Turn the
LARGE
knob
to select the ICS Function. Turn the
SMALL
knob to view the
Aux Volume function. Then, press the
ENT
key.
Figure 3-17
Select the Aux Audio Function
2.
Turn the
SMALL
knob to turn the Aux Audio On or Off.
3.
Turn the
LARGE
knob to select the Aux Volume. Turn the
SMALL
knob to set the value. Then, press the
ENT
key.
Turn Small Knob To Turn Aux On/Off
Press the ENT Key to Save
the Displayed Value
Press the CLR Key To Revert
to the Previous Value
Turn LARGE And
Then SMALL Knob To
Adjust Aux Volume
Figure 3-18
Adjust the Aux Audio
4.
Press the
CLR
key to revert to the previous Volume value and
then repeat step 3 to select a new value.