Garmin GTR 225 GTR 255/255A/255B Pilot’s Guide - Page 33
Load Database
View all Garmin GTR 225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3.4.5 Load Database The GTR 225 has a USB connector to allow for easily updating the system databases. NOTE: Garmin recommends the use of a USB 2.0 compatible USB flash drive for updating the database. 1. Insert the supplied cable into the USB port on the top right corner of the GTR 225. 2. Insert the USB memory device into the other end of the cable. USB Port USB Cable USB Memory Device Figure 3-25 USB Update Progress 3. Press FUNC to access the Functions. Turn the LARGE knob to select the SYS Function. Turn the SMALL knob to view the Load Database function. Then, press the ENT key. Figure 3-38 Database Update Display 4. Verify the database version on USB. Then, press the ENT key. Updating will begin automatically. Figure 3-39 Verify Database Version 190-01182-00 Rev. A Garmin GTR 225/225A/225B Pilot's Guide 3-15