Garmin Intelliducer NMEA 2000 0-12 Tilt Installation Instructions - Page 3
Thru-Hull Intelliducer Installation Instructions, Product Registration, Packing List and Tools Needed
View all Garmin Intelliducer NMEA 2000 0-12 Tilt manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Thru-Hull Intelliducer Installation Instructions To obtain the best possible performance, install your Thru-Hull Intelliducer according to the following instructions. If you experience difficulty during the installation, contact Garmin Product Support, or seek the advice of a professional installer. The Intelliducer is designed for metal and fiberglass boats. Do not install this Intelliducer in a wood-hull boat. This Thru-Hull Intelliducer provides depth information either to a NMEA 0183-compatible device, or to your existing NMEA 2000® network, depending on the model. For more information about NMEA 2000, visit www.garmin.com. WARNING: See the Important Safety and Product Information guide in the product box for product warnings and other important information. Product Registration Help us better support you by completing our online registration today! Connect to our Web site at http://my.garmin.com. Keep the original sales receipt, or a photocopy, in a safe place. For future reference, write the serial number assigned to your Intelliducer in the space provided. The serial number is located on a sticker on the top portion of the Intelliducer. Serial number Contact Garmin Contact Garmin if you have any questions while installing or using your Intelliducer. In the USA contact Garmin Product Support by phone: (913) 397-8200 or (800) 800-1020, or go to www.garmin.com/support/. In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808 2380000 (within the UK). Packing List and Tools Needed Before installing your Intelliducer, confirm that your package includes the following items. If any parts are missing, contact your Garmin dealer immediately. Standard Package • Thru-Hull Intelliducer - top and bottom portions • Gasket and locking ring • Power/data cable, or NMEA 2000 cable • NMEA 2000 T-connector • Mild detergent OR weak solvent (such as isopropyl alcohol) • Marine sealant (suitable for belowwaterline use) (3M - Fast Cure 5200 or Boat Life - Life Seal recommended) • Cable ties Tools Needed (not included) • Angle finder OR digital level • Safety goggles and dust mask • Drill and drill bits • Hole saws • Sandpaper • Water-based antifouling paint (mandatory for salt-water installations) • File (metal hull installations) • Fiberglass cloth and resin OR 2 in. (51 mm) cylinder, wax, tape, and casting epoxy (cored fiberglass hull installations) Thru-Hull Intelliducer Installation Instructions