Garmin LVC 18 Technical Specification - Page 16
MECHANICAL CHARACTERISTICS & MOUNTING, a. GPS 18 Bottom Case Dimensions, Under Mold
UPC - 753759061241
View all Garmin LVC 18 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3 MECHANICAL CHARACTERISTICS & MOUNTING The central threaded recess accepts a metric M3 threaded bolt. The recess is approximately 4 mm deep (4.32 +/- 0.08 mm). The following drawings show example geometries for mounting hardware in case you wish to design your own custom mount. Figure 5 shows mounting geometry for a mount formed from steel sheet metal that is 1.15 mm thick. Figure 7 shows similar mounting geometry for mount formed from aluminum sheet metal that is 1.25 mm thick. Use caution when tightening the mounting bolt. Tightening the mounting bolt can cause the mount to pull tight directly against the metal insert, not against the plastic housing, which would tend to pull the insert out of the plastic. Figure 6 shows the dimensions of our GPS 18 Flush Mount, part number 010-10453-00. Figure 4a. GPS 18 Bottom Case Dimensions, Under Mold Figure 4b. GPS 18 Bottom Case, Outside of Casing GPS 18 Technical Specifications (190-00307-00) Page 10 Rev. D