Garmin Monterra Quick Start Manual - Page 2

Introduction - accessories

Page 2 highlights

Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Overview À Camera Á Microphone  Power key à LED flash Ä Volume keys Å Battery cover D-ring Æ Waterproof speaker Ç Headphone port (under weather cap) È Mini-USB port (under weather cap) Battery Information WARNING The temperature rating for the device may exceed the usable range of some batteries. Alkaline batteries can rupture at high temperatures. Do not use a sharp object to remove batteries. CAUTION Contact your local waste disposal department to properly recycle the batteries. NOTICE Alkaline batteries lose a significant amount of their capacity as the temperature decreases. Therefore, use lithium batteries when operating the device in below freezing conditions. Installing the Battery Pack WARNING This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight. 1 Turn the D-ring counter-clockwise, and pull up to remove the cover. 2 Locate the metal contacts on the end of the lithium-ion battery. 3 Insert the battery into the compartment, contacts first. 4 Press the battery into place. 5 Replace the battery cover, and turn the D-ring clockwise. Charging the Battery Pack WARNING This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight. NOTICE To prevent corrosion, thoroughly dry the mini-USB port, the weather cap, and the surrounding area before charging or connecting to a computer. Do not attempt to use the device to charge a battery that was not provided by Garmin®. Attempting to charge a battery that was not provided by Garmin can damage the device and void the warranty. Before you can connect the straight connector of the USB cable to your device, you may have to remove optional mount accessories. NOTE: The battery will not charge when outside the temperature range of 32° to 122°F (0° to 50°C). NOTE: The battery will not charge when outside the temperature range of 32° to 113°F (0° to 45°C). You can charge the battery using a standard wall outlet or a USB port on your computer. 1 Pull up the weather cap À from the mini-USB port Á. 2 Plug the small end of the USB cable into the mini-USB port. 3 Plug the USB end of the cable into the AC adapter or a computer USB port. 4 Plug the AC adapter into a standard wall outlet. When you connect the device to a power source, the device turns on. 5 Charge the battery completely. Removing the Battery Pack WARNING Do not use a sharp object to remove batteries. 1 Turn the D-ring counter-clockwise, and pull up to remove the cover. 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Device Overview
À
Camera
Á
Microphone
Â
Power key
Ã
LED flash
Ä
Volume keys
Å
Battery cover D-ring
Æ
Waterproof speaker
Ç
Headphone port (under weather cap)
È
Mini-USB port (under weather cap)
Battery Information
WARNING
The temperature rating for the device may exceed the usable
range of some batteries. Alkaline batteries can rupture at high
temperatures.
Do not use a sharp object to remove batteries.
CAUTION
Contact your local waste disposal department to properly
recycle the batteries.
NOTICE
Alkaline batteries lose a significant amount of their capacity as
the temperature decreases. Therefore, use lithium batteries
when operating the device in below freezing conditions.
Installing the Battery Pack
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
1
Turn the D-ring counter-clockwise, and pull up to remove the
cover.
2
Locate the metal contacts on the end of the lithium-ion
battery.
3
Insert the battery into the compartment, contacts first.
4
Press the battery into place.
5
Replace the battery cover, and turn the D-ring clockwise.
Charging the Battery Pack
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
NOTICE
To prevent corrosion, thoroughly dry the mini-USB port, the
weather cap, and the surrounding area before charging or
connecting to a computer.
Do not attempt to use the device to charge a battery that was
not provided by Garmin
®
. Attempting to charge a battery that
was not provided by Garmin can damage the device and void
the warranty.
Before you can connect the straight connector of the USB cable
to your device, you may have to remove optional mount
accessories.
NOTE:
The battery will not charge when outside the
temperature range of 32° to 122°F (0° to 50°C).
NOTE:
The battery will not charge when outside the
temperature range of 32° to 113°F (0° to 45°C).
You can charge the battery using a standard wall outlet or a
USB port on your computer.
1
Pull up the weather cap
À
from the mini-USB port
Á
.
2
Plug the small end of the USB cable into the mini-USB port.
3
Plug the USB end of the cable into the AC adapter or a
computer USB port.
4
Plug the AC adapter into a standard wall outlet.
When you connect the device to a power source, the device
turns on.
5
Charge the battery completely.
Removing the Battery Pack
WARNING
Do not use a sharp object to remove batteries.
1
Turn the D-ring counter-clockwise, and pull up to remove the
cover.
2